Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: reeven on March 27, 2014, 09:13:39 am
-
I have an gigabyte 990fxa-ud3, rev4.0, from time to time USB 3.0 VIA VL805 dissapear from device manager.
Via USB 2 hub
Via usb 3 root hub
via usb extensible host controller
All these dissapear. I tried 3-4 drivers( from gigabyte site, and others from via), will all are the same.
Now, if i restart my PC, via controller remain gone. But if i shutdown PC and start it again, all via are coming back in device manager.
I do not understand why i never seen an problem with USB 2.0 from intel,amd, but only with USB 2.0/3.0 from 3dparty, like ETRON, VIA.
Via dissapear 3-4 times/week. Now i move all my usb3.0 devices on usb2.0 from amd southbridge, till i can get an usb3.0 hub.
-
This is a common problem with the etron drivers. As far as I know gigabyte has not addressed the issue and neither has entron. At least you can shut down and restart and they come back others cant even get the USB 3.0 to do that.
-
I am starting to think that the problem are the BIOS_es of this boards ,if 2 controllers (VIA and Etron) behave similarly on this AMD 9xx boards from Gigabyte.Some BIOS engineers are missing something for 2 years already.
Unless the controllers are identical :) as some time ago VIA engineers left VIA and shortly after VIA sued ASMedia for some patent infringement.
That s why i like FM2 boards ,the USB 3.0 simply works.
-
i send email to gigabyte, to via and to wd( i have an usb3.0 hdd my passport). All three does not have an clue, wd says that its gigabyte problem, but bluescreen that appear on usb3 are from their wd driver..
Gigabyte support is awfull, they speak an unknown english, and i tell them at least 3 times that i have latest firmware on hdd, mainboard, etc, and still they replay to me to update bios, etc.... so their support is zero.
Via support the same, zero.
And my mainboard, Gigabyte 990FX-UD3, revision 4.0 has VIA VL805 usb 3.0 controller, not ETRON.
And i haved an UD5 also with Via, not Etron, if im not mistaken.
-
Thread, that could have something in common: http://forum.giga-byte.co.uk/index.php/topic,14322.0.html
-
This is a common problem with the etron drivers. ....
Long time and still...
I never saw this problem with my old v3 mobo (etron usb) but v4's via usb is disappearing once a day.
-
I want to write an small update:
I manage to talk to VIA tech, they were ok on another problem( like plug device into usb 3.0 via get bluscreeen, trying to help me) but they didnt say anything about usb dissapear.
Cant fix usb 3.0 dissapear after restart PC, so i do this: i never restart PC, i always shut down.
If i start PC usb 3.0 are there.
Or if i restart PC by mistake, then i shut down and power on again, now usb 3.0 are working.
-
Thing is that after Windows updates you usually have to reboot the system .. then the via usb controller likes to disappear (after the reboot it's gone) .. then you have to power off/on to make it reappear again.
Isn't this a nice f*ck up?
I call it the Gigabyte drop-dead loop :-\
-
Have you tried reinstalling the driver that came on the CD with your motherboard? I had the same problem and this fixed it.
-
Gigabyte driver is not fixing this issue for me
-
I've come here after searching everywhere for VL805 drivers for Windows 7 for my Gigabyte 990 fxa ud3 rev 4.0 mobo. I've even been on Chinese sites, but haven't found anything that gives me a lasting result. This thread has been quiet for a while - have you all found something?
B
-
It's at the most obvious location - driver download page of your gigabyte mobo (under usb 3)
-
Yup. tried that one and thought it was good, but had to reboot my machine today and guess what? I get an "Unkown Device in Device Manager...
B
-
sure, you have to power off the machine once the via controller disappears - only then it comes back!
get used to it as this will happen from time to time.
-
Blimey, that's s***e.
B
-
Oh, and btw, IF you have a fan cooled cpu be aware that after system-sleep the fan speed is stuck at low rpm hence the CPU can/does overheat.
You will need bios F4a, which is not public, to fix this issue!
IF you watercool the cpu it won't affect you ;)
-
I do have aircooled, but I also run SpeedFan and Hardware monitor, which show me the temps for my mobo and gfx card, so I keep an eye on them. My CPU normally runs at about 12°C on idle and the graphics card at about 30°C.
B
-
problem is fixed with win10 latest updates. From august 2016 or so, no via usb 3.0 dissapear after restart. Same pc etc. ALso, no bluescreen usb3.0 with my wd external 2.5 drives. Win10 is much stable.
on via usb 3.0, i tested via 4.90 setup and also microsoft generic driver, now im on microsoft generic driver, is much stable then v4.90 via.
-
problem is fixed with win10 latest updates. .....
Really? WoW, once in a lifetime Microsoft is getting sumthin' right?! - well, this kinda nonperformance won't get me on spyware WinX anytime soon at all. My next OS is not Microsoft ;)