Official GIGABYTE Forum
Questions about GIGABYTE products => Thermal cooling solution & chassis => Topic started by: ShaneSimpkin on August 06, 2015, 06:46:26 am
-
Hi All
Well recently I got the windows 10 upgrade for my zoostorm PC that originally came with Windows 8.1, and I have realized that the GIGABYTE App center + All apps from GIGABYTE have been giving the same message.
"This Driver Can't Release to Failure!!!"
I have been searching for a solution and I can't find any so help would be appreciated!!
I may just downgrade back to windows 8.1 as I had no errors with the app center then.
-
Hi All
Well recently I got the windows 10 upgrade for my zoostorm PC that originally came with Windows 8.1, and I have realized that the GIGABYTE App center + All apps from GIGABYTE have been giving the same message.
"This Driver Can't Release to Failure!!!"
I have been searching for a solution and I can't find any so help would be appreciated!!
:-[ :-[ :-[ :-[ :-[ I have the same problem and it popping up all over the internet .I came here expecting a apology and its been worked on but nothing ,very disappointing "This Driver Can't Release to Failure!!!" windows 10 fix !!!
I may just downgrade back to windows 8.1 as I had no errors with the app center then.
-
Hi All
Well recently I got the windows 10 upgrade for my zoostorm PC that originally came with Windows 8.1, and I have realized that the GIGABYTE App center + All apps from GIGABYTE have been giving the same message.
"This Driver Can't Release to Failure!!!"
I have been searching for a solution and I can't find any so help would be appreciated!!
:-[ :-[ :-[ :-[ :-[ I have the same problem and it popping up all over the internet .I came here expecting a apology and its been worked on but nothing ,very disappointing "This Driver Can't Release to Failure!!!" windows 10 fix !!!
I may just downgrade back to windows 8.1 as I had no errors with the app center then.
The same problem.Help us, Please!
-
I have the same problem after upgrading to Windows 10 >:(
-
If you uninstall all Gigabyte drivers and utilities, then reinstall them in Win 10, this will fix the issue.
-
Possible solution 1:
Cause - Components of APP Center require access to on-board Wi-Fi. Where no on-board Wi-Fi exists the components fail.
Components - Cloud Server Station, GIGABYTE Remote and Remote OC.
Solution;
Open APP Center (from System Tray - bottom right of your screen)
Click on the tabs for each of the 3 components listed above.
Look for the radio switch button titled "Always run on next reboot" - Turn switch OFF
If you require the use of any of the above components, goto solution #2 (below)
Possible solution 2:
Cause - APP Center components not compatible with Windows 10
Solution - install the latest version of APP Center (or only the components you require) available on the Gigabyte Downloads page (http://www.gigabyte.com.au/products/product-page.aspx?pid=5362&dl=1&RWD=0#utility).
The current version of the APP Center (at the time of writing this post) is B15.0916
Good luck.
I hope this helps.