Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: pendulus on September 22, 2015, 03:06:51 am

Title: GA-Z77X-UD3H VIA USB Controller & Windows 10
Post by: pendulus on September 22, 2015, 03:06:51 am
Motherboard: GA-Z77X-UD3H
Ver 1.0
BIOS Version F18

Upgraded to Windows 10 64-bit recently (fresh install). Have had issues with the VIA USB eXtensible Host Controller. I was running Windows 7 Enterprise before and never had any problems with this board concerning drivers. Checked GIGABYTE site for new drivers but I don't see anything USB related for Windows 10 (http://www.gigabyte.com/products/product-page.aspx?pid=4153&dl=1#dl). Tried the one listed for Windows 8.1 and that seemed to help. Still not 100% fixed. The main issue is the mouse will not always power on during boot up (sometimes keyboard). If I reboot or switch USB ports that sometimes resolves issue. Any ideas?

Title: Re: GA-Z77X-UD3H VIA USB Controller & Windows 10
Post by: -Andy- on September 27, 2015, 10:48:58 pm
Quote from: pendulus on September 22, 2015, 03:06:51 am
Motherboard: GA-Z77X-UD3H
Ver 1.0
BIOS Version F18

Upgraded to Windows 10 64-bit recently (fresh install). Have had issues with the VIA USB eXtensible Host Controller. I was running Windows 7 Enterprise before and never had any problems with this board concerning drivers. Checked GIGABYTE site for new drivers but I don't see anything USB related for Windows 10 (http://www.gigabyte.com/products/product-page.aspx?pid=4153&dl=1#dl). Tried the one listed for Windows 8.1 and that seemed to help. Still not 100% fixed. The main issue is the mouse will not always power on during boot up (sometimes keyboard). If I reboot or switch USB ports that sometimes resolves issue. Any ideas?

Try these drivers https://drive.google.com/open?id=0B2Q_BxbO1AYbTXY0R0JxcUsxbVk

I have a GA-Z77X-UD4H with the same Via chipset on W10 pro X64 and they work perfect. All my devices are working great on the VIA USB ports. If you need other drivers, let me know so that i can upload them for you to my google drive. I have the latest:
Intel chipset INF
Intel MEI
Intel RST
Modded Intel USB 3.0 drivers (must be installed by temporarily disable Driver Signing Enforcement)
Marvell Sata
Realtek Audio
Realtek LAN

Cheers
Andy
Title: Re: GA-Z77X-UD3H VIA USB Controller & Windows 10
Post by: pendulus on October 07, 2015, 02:51:25 am
Quote from: -Andy- on September 27, 2015, 10:48:58 pm
I have a GA-Z77X-UD4H with the same Via chipset on W10 pro X64 and they work perfect. All my devices are working great on the VIA USB ports. If you need other drivers, let me know so that i can upload them for you to my google drive. I have the latest:
Intel chipset INF
Intel MEI
Intel RST
Modded Intel USB 3.0 drivers (must be installed by temporarily disable Driver Signing Enforcement)
Marvell Sata
Realtek Audio
Realtek LAN

Cheers
Andy

Sorry didn't not have notify set and missed your reply. Do you mind reposting drivers? Looks like the folder is currently empty. I'm still having issues with USB ports. Thanks.
Title: Re: GA-Z77X-UD3H VIA USB Controller & Windows 10
Post by: -Andy- on October 08, 2015, 10:28:19 pm
Quote from: pendulus on October 07, 2015, 02:51:25 am
Quote from: -Andy- on September 27, 2015, 10:48:58 pm
I have a GA-Z77X-UD4H with the same Via chipset on W10 pro X64 and they work perfect. All my devices are working great on the VIA USB ports. If you need other drivers, let me know so that i can upload them for you to my google drive. I have the latest:
Intel chipset INF
Intel MEI
Intel RST
Modded Intel USB 3.0 drivers (must be installed by temporarily disable Driver Signing Enforcement)
Marvell Sata
Realtek Audio
Realtek LAN

Cheers
Andy

Sorry didn't not have notify set and missed your reply. Do you mind reposting drivers? Looks like the folder is currently empty. I'm still having issues with USB ports. Thanks.

yes no problem, here you go.
https://drive.google.com/open?id=0B2Q_BxbO1AYbM3YyWldXS2p4SVk

Let me know if this works for you
Title: Re: GA-Z77X-UD3H VIA USB Controller & Windows 10
Post by: pendulus on October 09, 2015, 01:52:31 am
Quote
yes no problem, here you go.
https://drive.google.com/open?id=0B2Q_BxbO1AYbM3YyWldXS2p4SVk

Let me know if this works for you

Thanks a lot. Installed and ports are working normally. So far so good. Appreciate it!
Title: Re: GA-Z77X-UD3H VIA USB Controller & Windows 10
Post by: -Andy- on October 12, 2015, 03:56:29 pm
Quote from: pendulus on October 09, 2015, 01:52:31 am
Quote
yes no problem, here you go.
https://drive.google.com/open?id=0B2Q_BxbO1AYbM3YyWldXS2p4SVk

Let me know if this works for you

Thanks a lot. Installed and ports are working normally. So far so good. Appreciate it!

OK great :)
Title: Re: GA-Z77X-UD3H VIA USB Controller & Windows 10
Post by: Mike_retner01 on October 29, 2015, 05:20:18 pm
Having probs with intel usb ports, mind sharing your drivers again bro ?
Title: Re: GA-Z77X-UD3H VIA USB Controller & Windows 10
Post by: -Andy- on October 30, 2015, 12:43:11 am
Quote from: Mike_retner01 on October 29, 2015, 05:20:18 pm
Having probs with intel usb ports, mind sharing your drivers again bro ?

Then you need Intel USB 3.0 modded drivers. I assume you have win10 Pro X64? You have to use modded Intel USB 3.0 drivers to get USB 3.0 speeds as the default Microsoft drivers are slow as USB 2.0

First download the modded drivers from my Google Drive from below link:
https://drive.google.com/open?id=0B2Q_BxbO1AYbWlBuaVlyekZuWWs

Then apply the digital signature procedure for these modded drivers from link below:
http://www.win-raid.com/t11f23-Modded-Intel-AHCI-and-RAID-Drivers-digitally-signed.html

Download the guide for how to update modded drivers on an Z77 motherboard from my Google Drive:
https://drive.google.com/open?id=0B2Q_BxbO1AYbVDJqQzdoeFgyTE0

All credits goes to Fernando from http://www.win-raid.com

If you need the VIA VL800 USB 3.0 drivers too for Win10, see link below:
https://drive.google.com/open?id=0B2Q_BxbO1AYbeVJvMXlYSTFNYkU
Title: Re: GA-Z77X-UD3H VIA USB Controller & Windows 10
Post by: JuankyKong on December 30, 2015, 11:47:30 pm
Quote from: -Andy- on October 12, 2015, 03:56:29 pm
Quote from: pendulus on October 09, 2015, 01:52:31 am
Quote
yes no problem, here you go.
https://drive.google.com/open?id=0B2Q_BxbO1AYbM3YyWldXS2p4SVk

Let me know if this works for you

Thanks a lot. Installed and ports are working normally. So far so good. Appreciate it!

OK great :)

I am having the exact same issue on GA-Z77X-UD3H, windows 10 does not really recognize the 3.0 ports in the motherboard, they are nowhere to be found, I am wondering if you could share those drivers with me ? thanks a ;lo
Title: Re: GA-Z77X-UD3H VIA USB Controller & Windows 10
Post by: gudinko on August 30, 2016, 01:43:22 pm
Quote from: -Andy- on October 30, 2015, 12:43:11 am
If you need the VIA VL800 USB 3.0 drivers too for Win10, see link below:
https://drive.google.com/open?id=0B2Q_BxbO1AYbeVJvMXlYSTFNYkU
Hello my friend,

I need those drivers too. Do you have a working link?

Thanks in advance! :)
Title: Re: GA-Z77X-UD3H VIA USB Controller & Windows 10
Post by: shadowsports on August 31, 2016, 06:17:25 am
Thread has been inactive for 8 months...  I'd send a PM.
Title: Re: GA-Z77X-UD3H VIA USB Controller & Windows 10
Post by: Pawel on October 08, 2016, 06:35:18 pm
Quote from: shadowsports on August 31, 2016, 06:17:25 am
Thread has been inactive for 8 months...  I'd send a PM.
I need this drivers too. Please send me link ;)
Title: Re: GA-Z77X-UD3H VIA USB Controller & Windows 10
Post by: Lagoon on November 29, 2016, 11:10:15 pm
I need the driver package too.
Title: Re: GA-Z77X-UD3H VIA USB Controller & Windows 10
Post by: DoerrSt on December 14, 2016, 08:38:24 pm
Hello,

I am also very interrested getting this Drivers to have a fully working System again. Please send me a PM with a download link if possible.

Thank you!
Title: Re: GA-Z77X-UD3H VIA USB Controller & Windows 10
Post by: -Andy- on December 14, 2016, 11:33:32 pm
OK here you go all
https://drive.google.com/open?id=0B2Q_BxbO1AYbaVdraElIc0pOSW8
Title: Re: GA-Z77X-UD3H VIA USB Controller & Windows 10
Post by: Daniou on February 22, 2017, 11:55:51 pm
Hi,
Is it possible for you to post the link to USB 3.0 drivers, please?
Thank you in advance!
Title: Re: GA-Z77X-UD3H VIA USB Controller & Windows 10
Post by: vageelis_nikol on March 09, 2017, 03:58:17 pm
I need the driver package too again please! :-[
Title: Re: GA-Z77X-UD3H VIA USB Controller & Windows 10
Post by: revealed on July 21, 2017, 04:45:04 pm
Hello i have a same issue
please re upload driver for missing google drive error 404
thanks
Title: Re: GA-Z77X-UD3H VIA USB Controller & Windows 10
Post by: meeheehee on August 22, 2017, 12:37:49 am
Hello,

I'm having this same issue! Is it possible to provide a link to the modified drivers?

Thanks
Title: Re: GA-Z77X-UD3H VIA USB Controller & Windows 10
Post by: shadowsports on August 23, 2017, 11:27:19 pm
Are you guys sending PM's (Asks a second time)  :P
Title: Re: GA-Z77X-UD3H VIA USB Controller & Windows 10
Post by: chronicwill on August 25, 2017, 08:37:35 pm
I would also like a link to these drivers please!
Title: Re: GA-Z77X-UD3H VIA USB Controller & Windows 10
Post by: -Andy- on August 26, 2017, 12:43:54 am
I only received a pm from Meeheehee.

Below the VIA driver. Just execute the setup.exe to install.
https://drive.google.com/open?id=0B2Q_BxbO1AYbLTJhVnlHRFBXbDg

Below the Intel driver. Just execute the DPInst64.exe to install. All 3 components (controller, hub and switch) will be installed.
https://drive.google.com/open?id=0B2Q_BxbO1AYbSjdtODl3c0ZoeFU

For the Intel drivers all credits go to Fernando from http://www.win-raid.com/forum.php

Good luck.

Andy
Title: Re: GA-Z77X-UD3H VIA USB Controller & Windows 10
Post by: jeferson_silva on June 09, 2018, 06:14:55 pm
Quote from: -Andy- on August 26, 2017, 12:43:54 am
I only received a pm from Meeheehee.

Below the VIA driver. Just execute the setup.exe to install.
https://drive.google.com/open?id=0B2Q_BxbO1AYbLTJhVnlHRFBXbDg

Below the Intel driver. Just execute the DPInst64.exe to install. All 3 components (controller, hub and switch) will be installed.
https://drive.google.com/open?id=0B2Q_BxbO1AYbSjdtODl3c0ZoeFU

For the Intel drivers all credits go to Fernando from http://www.win-raid.com/forum.php

Good luck.

Andy

Hi Andy,

Would you be able to share the drivers with me?
The link is not working anymore.
I hope you're still active in this forum.

Regards,
Jeferson
Title: Re: GA-Z77X-UD3H VIA USB Controller & Windows 10
Post by: shadowsports on June 12, 2018, 03:21:20 pm
Quote from: jeferson_silva on June 09, 2018, 06:14:55 pm
Quote from: -Andy- on August 26, 2017, 12:43:54 am
I only received a pm from Meeheehee.

Below the VIA driver. Just execute the setup.exe to install.
https://drive.google.com/open?id=0B2Q_BxbO1AYbLTJhVnlHRFBXbDg

Below the Intel driver. Just execute the DPInst64.exe to install. All 3 components (controller, hub and switch) will be installed.
https://drive.google.com/open?id=0B2Q_BxbO1AYbSjdtODl3c0ZoeFU

For the Intel drivers all credits go to Fernando from http://www.win-raid.com/forum.php

Good luck.

Andy

Hi Andy,

Would you be able to share the drivers with me?
The link is not working anymore.
I hope you're still active in this forum.

Regards,
Jeferson

Suggest you sent a PM.
Title: Re: GA-Z77X-UD3H VIA USB Controller & Windows 10
Post by: jeferson_silva on June 12, 2018, 04:32:50 pm
Quote from: shadowsports on June 12, 2018, 03:21:20 pm
Quote from: jeferson_silva on June 09, 2018, 06:14:55 pm
Quote from: -Andy- on August 26, 2017, 12:43:54 am
I only received a pm from Meeheehee.

Below the VIA driver. Just execute the setup.exe to install.
https://drive.google.com/open?id=0B2Q_BxbO1AYbLTJhVnlHRFBXbDg

Below the Intel driver. Just execute the DPInst64.exe to install. All 3 components (controller, hub and switch) will be installed.
https://drive.google.com/open?id=0B2Q_BxbO1AYbSjdtODl3c0ZoeFU

For the Intel drivers all credits go to Fernando from http://www.win-raid.com/forum.php

Good luck.

Andy

Hi Andy,

Would you be able to share the drivers with me?
The link is not working anymore.
I hope you're still active in this forum.

Regards,
Jeferson

Suggest you sent a PM.
I already did it.

Thanks