Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: irishbug on August 28, 2010, 11:02:27 pm

Title: Please help! EX58-UD3R I can't update the BIOS from F9
Post by: irishbug on August 28, 2010, 11:02:27 pm
Hi,

Please help me on this. I have been trying to update my BIOS from F9 to the F11 version. I have tried using QFlash with a USB flash drive, and a floppy disk and it will not flash for me at all. All I get is a "BIOS ID check error" whenever I try to flash. Does anyone have another idea of how I can get past this guys?  ???


Title: Re: Please help! EX58-UD3R I can't update the BIOS from F9
Post by: Dark Mantis on August 28, 2010, 11:07:56 pm
I would recommend that you have downloaded the correct BIOS update for your board because the BIOS checksum error usually occurs when it is the wrong update.
Title: Re: Please help! EX58-UD3R I can't update the BIOS from F9
Post by: irishbug on August 28, 2010, 11:19:12 pm
Hi Dark. I downloaded that BIOS from the Gigabyte support site. GA-EX58-UD3R Rev. 1.0 which I found here http://www.gigabyte.com/products/product-page.aspx?pid=2989&dl=1#ov One funny thing I will say is that when my comp. starts up, the BIOS screen lists my board as EX58-UD3R-SLI, but Gigabyte doesn't have a board listed with SLI listed in the title. If you would, can you go to the link I have here and check to see if that is the correct board? The box it came in says EX58-UD3R so I don't know what else to do.

Thanks
Title: Re: Please help! EX58-UD3R I can't update the BIOS from F9
Post by: irishbug on August 28, 2010, 11:37:37 pm
Is it possible to reset a BIOS back to it's original version? What I mean is, when a person resets a CMOS/BIOS, does that take it back to original? Sorry to sound that ignorant, but I can't seem to find anything online that addresses that or even tells a person how to do it. I am downloading the manual and see if it explains what that procedure is. Thanks guys.
Title: Re: Please help! EX58-UD3R I can't update the BIOS from F9
Post by: Dark Mantis on August 28, 2010, 11:52:16 pm
I have just looked at the websites .com and .co.uk and they seem to tally with the BIOS information. As you say there is no board ending SLI.
You could try downloading the BIOS update from the UK site and see if it will work:
 
http://www.giga-byte.co.uk/products/product-page.aspx?pid=2989&dl=1#dl

To answer your later question, yes you can reflash back to an older version, there is no reason why not and in fact many have done it for one reason or another. There is nothing ignorant about asking a question. If you don't know it is the most sensible way to find out. Let me know if I can help further.
Title: Re: Please help! EX58-UD3R I can't update the BIOS from F9
Post by: irishbug on August 29, 2010, 12:24:57 am
thanks for that Dark. Do you think it would be a good idea to reset my CMOS? Also, heres the strange thing, my board says its a Dual BIOS version, but according to the manual, the F8 key for QFlash isn't listed as Dual BIOS/QFlash utility when I enter the BIOS. I'm wondering if the dual bios portion of this board got messed up somehow. I have been trying to find the dual bios utility but I can't find it to download. If anyone has or seen the utility somewhere, please let me know so I can download it and see if it gets me out of this problem I have.
Title: Re: Please help! EX58-UD3R I can't update the BIOS from F9
Post by: Dark Mantis on August 29, 2010, 12:42:54 am
It is just coming to light that there is some problem with the DualBIOS and it is not resetting the main BIOS after a flash problem or when the primary BIOS get corrupted. Watch this space as they say.
Title: Re: Please help! EX58-UD3R I can't update the BIOS from F9
Post by: Beekeeper on August 29, 2010, 01:20:45 pm
irishbug, if post screen shows EX58-SLI then you have exactly this mobo, check the model markings on the pcb
and the only path for you is to use the -SLI bios for this particular mb.
after some longer search i have found it, look:
http://br.gigabyte.com/Support/Motherboard/BIOS_Model.aspx?ProductID=3022&ver=
Title: Re: Please help! EX58-UD3R I can't update the BIOS from F9
Post by: Dark Mantis on August 29, 2010, 01:39:00 pm
Well spotted Beekeeper.

irishbug please can you update your Profile (button at the top of the page) with your location. This often helps with answering questions especially if members are in foreign parts.
Title: Re: Please help! EX58-UD3R I can't update the BIOS from F9
Post by: Tidosho on August 29, 2010, 04:59:05 pm
Have you tried @BIOS? It is a Gigabyte BIOS flash utility that runs under Windows, and will automatically detect your board and find the correct BIOS for you. I had the same problem as the OP once with my old GA-8S648FX Pentium 4 board using QFlash, before I upgraded to a GA-EP45-UD3R, and @BIOS never let me down on both boards!

Please don't say you're running Linux, I'll feel a right fool!
Title: Re: Please help! EX58-UD3R I can't update the BIOS from F9
Post by: absic on August 29, 2010, 05:01:30 pm
Not sure I would agree with your views on @BIOS.
I have seen this Gigabyte utility brick a lot of boards and personally I would not recommend using it under any circumstances.
Title: Re: Please help! EX58-UD3R I can't update the BIOS from F9
Post by: irishbug on August 29, 2010, 06:04:37 pm
irishbug, if post screen shows EX58-SLI then you have exactly this mobo, check the model markings on the pcb
and the only path for you is to use the -SLI bios for this particular mb.
after some longer search i have found it, look:
http://br.gigabyte.com/Support/Motherboard/BIOS_Model.aspx?ProductID=3022&ver=

Hi Bee, the post screen shows UD3R-SLI on bootup. That's after I disable the spalsh screen. If I posted earlier that it read  as an EX58-SLI, then I apologize for that. I just checked it and it is as I mentioned before, UD3R-SLI. So I'm not sure the link you posted will pan out. I'll head over there now and see and post back.

Thanks
Title: Re: Please help! EX58-UD3R I can't update the BIOS from F9
Post by: irishbug on August 29, 2010, 06:06:06 pm
Well spotted Beekeeper.

irishbug please can you update your Profile (button at the top of the page) with your location. This often helps with answering questions especially if members are in foreign parts.

Done, Northern Alabama USA
Title: Re: Please help! EX58-UD3R I can't update the BIOS from F9
Post by: Dark Mantis on August 29, 2010, 06:16:47 pm
irishbug please can you update your Profile (button at the top of the page) with your location. This often helps with answering questions especially if members are in foreign parts.

Done, Northern Alabama USA


Thanks it just makes things easier.

Have you tried @BIOS? It is a Gigabyte BIOS flash utility that runs under Windows, and will automatically detect your board and find the correct BIOS for you. I had the same problem as the OP once with my old GA-8S648FX Pentium 4 board using QFlash, before I upgraded to a GA-EP45-UD3R, and @BIOS never let me down on both boards!

I would also like to add my disdain of this utility to absic's already made point. It is far to risky for my liking and have seen too many bricked motherboards from people using it . It is just too dangerous to try and flash the BIOS from within the OS.
Title: Re: Please help! EX58-UD3R I can't update the BIOS from F9
Post by: irishbug on August 29, 2010, 06:37:15 pm
Have you tried @BIOS? It is a Gigabyte BIOS flash utility that runs under Windows, and will automatically detect your board and find the correct BIOS for you. I had the same problem as the OP once with my old GA-8S648FX Pentium 4 board using QFlash, before I upgraded to a GA-EP45-UD3R, and @BIOS never let me down on both boards!

Please don't say you're running Linux, I'll feel a right fool!

No, I think I had this in my initial post. When I do a search using @BIOS, all the various servers list my board as an EX58-UD3R-SLI with F9 as the latest update. Which is strange because the gigabyte support site lists F12i (Beta) as the latest version available. I just took a peak at that link you posted for the SLI version and it really looks promising (interestingly enough, it lists F10i beta as the latest BIOS) but I wanted to also add this snapshot that shows what I have, according to the @BIOS utility. And I say this with no disrespect to anyone, but I know what a lot of people feel about the @BIOS utility, but I wanted to show an idea of what BIOS and board I have. I am cautious messing with the utility though.
Title: Re: Please help! EX58-UD3R I can't update the BIOS from F9
Post by: irishbug on August 29, 2010, 07:12:34 pm
irishbug, if post screen shows EX58-SLI then you have exactly this mobo, check the model markings on the pcb
and the only path for you is to use the -SLI bios for this particular mb.
after some longer search i have found it, look:
http://br.gigabyte.com/Support/Motherboard/BIOS_Model.aspx?ProductID=3022&ver=

Beekeeper, you got it man! Hit it right on the head. I copied the BIOS to a flash drive, and booted into Q Flash and it was going to update. I stopped short so I could get some more information on it though. Wow, how does Gigabyte get away with something like that? So confusing, the site isn't in english either, so I never would have been able to find it. Now if I can just find that page in english, I'll be good to go! LOL Maybe thats why @BIOS didn't list it either, since the next BIOS update after F9 is a (Beta) they just don't list it until it's not a Beta anymore. Thanks for taking the time for me, and thanks to all who helped and gave information on this too.

Again, thanks!
Title: Re: Please help! EX58-UD3R I can't update the BIOS from F9
Post by: Dark Mantis on August 29, 2010, 07:47:27 pm
Glad you got it sorted in the end. It does seem stupid not to have your board listed as such on hte UK site though. I think you should contact Gigabyte and let them know of this error.