Official GIGABYTE Forum

Other questions related to GIGABYTE => Suggestions => Topic started by: brduran on August 30, 2011, 12:49:08 am

Title: Get the Internet BIOS update to work properly
Post by: brduran on August 30, 2011, 12:49:08 am

After an internet BIOS update on a Gigabyte 890GPA-UD3H and specifically indicating not to load the default settings on reboot it still did it, an that has created a huge headache. I can't get the RAIDed computer to boot up again no matter what, it just keeps rebooting. Is anybody trying just to get it right?

Title: Re: Get the Internet BIOS update to work properly
Post by: Dark Mantis on August 30, 2011, 06:54:16 am

Hi

I take it from what you have said that you tried to update the BIOS using the @BIOS program which is totally opposite to what we always recommend. I would say it is likely that you have corrupted the BIOS now and luckilly you have a backup BIOS chip[ on these Gigabyte motherboards or the board would be toast.

Try this. t might take a few attempts to get right.

You can kick in the backup BIOS by shutting down the PSU from the wall, then hold down your case power button in and then turn on the power supply button, a few seconds later the board will start, shut off the power supply then.   Then you can turn on the power supply again and power up the board normally and DualBIOS will kick in.