Official GIGABYTE Forum

GA-970A-D3 Issues....

GA-970A-D3 Issues....
« on: March 19, 2013, 03:17:58 pm »
Hi guys, I have some a very frustrating issue with my new build and I need some help. Basically after 15 mins of running, it freezes and no key/mouse/network functions work and a hard reset is required to get it out of that state. This happens under Windows 7 64bit and also ESXi 5.1. I'm leaning towards the issue being related to Bios settings but not sure what settings to use

My setup is

GA-970A-D3 - Bios currently F11 but was going to update to F12c to see if it helped???
AMD FX 8350 (AM3+) 8 Core
Corsair 32GB Vengeance (4x8GB) DDR3 1600MHz
950W ATX Modular PSU
2 x 2TB Samsung HDD

I have tested with all default/optimized settings but nothing seems to work.
Can anyone offer any assistance?
Thanks

Vezina

  • 871
  • 10
  • If it s not broken, fix it until it is !
Re: GA-970A-D3 Issues....
« Reply #1 on: March 19, 2013, 04:20:14 pm »
What  hardware revision is the motherboard ?!

See at the lower left side of the mobo..
« Last Edit: March 19, 2013, 04:20:55 pm by Vezina »
Over & Out !

AMD FX (APU-s included) users should install - KB2645594 & KB2646060 under Windows 7

1.ASUS Sabertooth 990FX 2.0 + FX 6300 + H60
2.MSI A88X-G41 PC Mate + A8 5600K + Hyper TX 2
3.Gigabyte F2A75-D3H + A4 5300
4.ASUS AM1M-A + Athlon 5150

Re: GA-970A-D3 Issues....
« Reply #2 on: March 19, 2013, 10:12:07 pm »
hi its V1.3

thanks

Re: GA-970A-D3 Issues....
« Reply #3 on: March 19, 2013, 11:24:34 pm »
Hi just to add also I have ran memtest86 and get errors on test 2 and 6. I've read some sites which say that if bios is left to auto sometimes the settings are incorrect. I have the following memory installed but not sure on the settings required

http://www.corsair.com/en/memory-by-product-family/vengeance/vengeance-32gb-quad-channel-ddr3-memory-kit-cmz32gx3m4x1600c10.html

Vezina

  • 871
  • 10
  • If it s not broken, fix it until it is !
Re: GA-970A-D3 Issues....
« Reply #4 on: March 20, 2013, 06:17:21 pm »
Your board DOES NOT SUPPORT the CPU.

Get a different board before you see smoke or fire.

Revisions 1.4 and 3.0 support the FX 8350.Go for a UD3 board.







« Last Edit: March 20, 2013, 06:32:39 pm by Vezina »
Over & Out !

AMD FX (APU-s included) users should install - KB2645594 & KB2646060 under Windows 7

1.ASUS Sabertooth 990FX 2.0 + FX 6300 + H60
2.MSI A88X-G41 PC Mate + A8 5600K + Hyper TX 2
3.Gigabyte F2A75-D3H + A4 5300
4.ASUS AM1M-A + Athlon 5150

Re: GA-970A-D3 Issues....
« Reply #5 on: March 24, 2013, 08:39:59 pm »
Hi Vezena, thank you for your reply. I have sent the board back and asked for a replacement. Didn't even think to check as it was bought as a bundle and presumed all would be compatible.

I'm hoping I will have no further problems

Thanks again