Official GIGABYTE Forum

Brand new i7 47..k and GA-Z97X-UD7 TH error code C0 and no boot or post

I've been searching all over the place and the closes i've found was this post.

http://forum.giga-byte.co.uk/index.php?topic=15105.msg92390#msg92390

Where is the 'approved' ram list?

Here is the ram I am using.
http://www.amazon.com/gp/product/B00A14ZT7E?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s01

I've re checked the processor 3 times to make sure its seeded correctly. If I try to boot with no ram i get code 20, but I can't find any information on this.

I've removed the battery and reset the cmos using the button on the board. And I still get nothing.

There are no hard drives hooked up, no extra video card, nothing. Thoughts?

dmdilks

  • 3078
  • 43
  • "If it isn't broke don't fix it"
    • http://dmdcomputerservice.webs.com/
Re: Brand new i7 47..k and GA-Z97X-UD7 TH error code C0 and no boot or post
« Reply #1 on: August 28, 2015, 11:42:57 am »
You said you have check the CPU 3 times. Did you look at the pins. Have you just tried one stick or other memory?
X299X Aorus Master, i9-9940x-3.30Ghz, 64gb G-Skill DDR4-2400, MSI RTX-3070 8GB, Cooler Master case, Thermal-take PSU 850w, 1-M2-NMVe SSD-512gb, 3-Pny 1TB SSD, 2-WD Raptors 1TB, Win 10 pro 64bit, Asus 35" 144Mhz Monitor.

Re: Brand new i7 47..k and GA-Z97X-UD7 TH error code C0 and no boot or post
« Reply #2 on: August 28, 2015, 01:43:20 pm »
I've tried all 4 memory sticks individually and in combinations.

This is the processor I bought.
http://www.amazon.com/gp/product/B00KPRWAX8?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00

I didn't notice any pins, which coincides with this post....

http://superuser.com/questions/232525/do-the-intel-core-i-series-processors-not-have-pins

Are there pins, and I am missing something? I'll tear the fan back off and take another look. From the housing it doesn't look like there are many ways it wouldn't mount correctly.

Thanks for all the help.

shadowsports

  • 2243
  • 67
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: Brand new i7 47..k and GA-Z97X-UD7 TH error code C0 and no boot or post
« Reply #3 on: August 29, 2015, 02:22:55 pm »
Straydoginc,
What dmdilks is referring to is the socket itself, not the bottom of the CPU.  A nice magnifying glass makes quick work of it...  If bent pin(s) are found I use a credit card to fix, but everyone has their own way.  Your memory doesn't appear to be on the QVL for your board.  You can try re-seating.  C0 error is non-descript (reserved, CPU Status, memory issue).    A CLR_CMOS and battery pull may also be a good idea.
« Last Edit: August 29, 2015, 03:56:53 pm by shadowsports »
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W11
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W11
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW

Re: Brand new i7 47..k and GA-Z97X-UD7 TH error code C0 and no boot or post
« Reply #4 on: August 31, 2015, 09:47:04 pm »
Bent pins on the socket. Sending back to Amazon for a replacement. :( Thanks guys. And so you are saying my memory is compatible? no worries there then?

shadowsports

  • 2243
  • 67
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: Brand new i7 47..k and GA-Z97X-UD7 TH error code C0 and no boot or post
« Reply #5 on: September 02, 2015, 04:12:08 am »
I don't believe your particular memory was on the QVL for this board.  That doesn't mean it won't work, its just not tested or certified compatible.  Its usually safer to use memory that is certified for your board.  Sorry about the PINs.  Happens, just not often.
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W11
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W11
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW