Official GIGABYTE Forum

Important information missing from manual

Important information missing from manual
« on: November 30, 2015, 02:18:49 am »
hello gigabyte support and helpers,

I'm using a B85(M?) chipset, can't check this week the exact board name but i assume the procedure does not differ from board to board for the b85 mobos. All I can remember rigth now is that it does not have a jumper or switch to easily switch to backup. ( Not cool gigabyte, how much extra cost would that have been, 3$?)

How can I manually reset BIOS back to backup version?
Can I update the backup BIOS version?

Thank you for your help community. I require it greatly.

Cheers,

Quintus II

dmdilks

  • 3078
  • 43
  • "If it isn't broke don't fix it"
    • http://dmdcomputerservice.webs.com/
Re: Important information missing from manual
« Reply #1 on: November 30, 2015, 06:26:23 pm »
Method #1:
1. Shut your PC down
2. Hold the power button until the PC starts and shuts down again
3. Press the power button again, your backup BIOS should kick in now and should re-flash the main BIOS if there's anything wrong with it.

Method #2:
1. Shut your PC down
2. Hold the power AND the reset button for about 10 sec, than release.
3. Backup BIOS should kick in anytime soon now.
X299X Aorus Master, i9-9940x-3.30Ghz, 64gb G-Skill DDR4-2400, MSI RTX-3070 8GB, Cooler Master case, Thermal-take PSU 850w, 1-M2-NMVe SSD-512gb, 3-Pny 1TB SSD, 2-WD Raptors 1TB, Win 10 pro 64bit, Asus 35" 144Mhz Monitor.

Re: Important information missing from manual
« Reply #2 on: December 03, 2015, 05:26:14 am »
Thank you for the answer but neither method works. Other suggestions?