Official GIGABYTE Forum

ahci enable mode from bios

ahci enable mode from bios
« on: March 18, 2017, 08:07:55 pm »
hi,
I have windows 7 64bit and I have changed the registry entry to enable the ahci mode without causing the crash after activating via bios AHCI mode.
But by the bios I can not find this option?

Use the P55A-UD3 board

Thanks in advance

shadowsports

  • 957
  • 29
  • Rev 1.1, BIOS F8
Re: ahci enable mode from bios
« Reply #1 on: March 18, 2017, 09:27:51 pm »
See page 24-25 of your manual.  Ensure the drive is connected to the primary SATA controller SATA2_0~5

Now see page 51.  This is where you set the operate mode for the controller, native SATA vs. RAID, IDE & Legacy mode.  Keep in mind that SATA on this chipset is emulated.

Would suggest you install the latest IRST driver since the Intel Matrix Storage Manager driver was for XP.     
Z97X-UD5H\Corsair RM850w, 4790K, 16GB Vengeance, GTX970 FTW SC 4GB ACX 2.0, 850 Pro's RAID0 (boot), Black 1TB, Win10 Pro, Obsidian 450D
P8Z68 Deluxe Gen3\TX850, 2600k, 16GB, GTX660 FTW SC Sig2, Force III's RAID0, Seagate 1TB , W10 Pro, Corsair 230T
NAS QNAP TS-219PII 4TB, MyBook 4TB
Nexus 6P Nougat