Official GIGABYTE Forum

Firmware Update and USB doesnt Power Down GA-Z170XP-SLI

Hargen

  • 3
  • 0
Firmware Update and USB doesnt Power Down GA-Z170XP-SLI
« on: April 06, 2017, 07:09:48 pm »
Hi all, I just updated my firmware and the USB doesnt power down my keyboard when i shut down. It worked fine before. What can i check if a setting has changed. I am using win 10

shadowsports

  • 1127
  • 31
  • Rev 1.1, BIOS F8
Re: Firmware Update and USB doesnt Power Down GA-Z170XP-SLI
« Reply #1 on: April 07, 2017, 02:20:58 am »
Hi all, I just updated my firmware and the USB doesnt power down my keyboard when i shut down. It worked fine before. What can i check if a setting has changed. I am using win 10

Not sure what "feature" or setting you are referring to? Are you saying your USB ports remain powered after the system is shutdown?
Z97X-UD5H\Corsair RM850w, 4790K, 16GB Vengeance, GTX970 FTW SC 4GB ACX 2.0, 850 Pro's RAID0 (boot), Black 1TB, Win10 Pro, Obsidian 450D
NAS QNAP TS-219PII 4TB, MyBook 4TB
Nexus 6P Nougat

Hargen

  • 3
  • 0
Re: Firmware Update and USB doesnt Power Down GA-Z170XP-SLI
« Reply #2 on: April 07, 2017, 12:25:43 pm »
Yes, in a nutshell. when i switch off the lights on my keyboard stay on. I have also noticed that my racing wheel also doesnt switch off completly. The power light on the wheel goes off but the fan still runs, before i updated everything shut off. I ave tried the USB suspension setting in windows and that did not change anything.

shadowsports

  • 1127
  • 31
  • Rev 1.1, BIOS F8
Re: Firmware Update and USB doesnt Power Down GA-Z170XP-SLI
« Reply #3 on: April 07, 2017, 06:42:07 pm »
Ah, got it.  This is definitely a BIOS related issue. 

Legacy USB Support - Try setting this to Disable and retest.  If that doesn't work, see if moving the wheel and keyboard to different ports helps.  If you are using a hub, remove it and connect directly to the boards ports.  Not a whole lot you can do in this situation if the ports remain powered after shutdown.  BIOS downgrade is another possible solution since you stated an earlier rev worked previously.   
Z97X-UD5H\Corsair RM850w, 4790K, 16GB Vengeance, GTX970 FTW SC 4GB ACX 2.0, 850 Pro's RAID0 (boot), Black 1TB, Win10 Pro, Obsidian 450D
NAS QNAP TS-219PII 4TB, MyBook 4TB
Nexus 6P Nougat

Hargen

  • 3
  • 0
Re: Firmware Update and USB doesnt Power Down GA-Z170XP-SLI
« Reply #4 on: April 17, 2017, 09:05:34 am »
Ah, got it.  This is definitely a BIOS related issue. 

Legacy USB Support - Try setting this to Disable and retest.  If that doesn't work, see if moving the wheel and keyboard to different ports helps.  If you are using a hub, remove it and connect directly to the boards ports.  Not a whole lot you can do in this situation if the ports remain powered after shutdown.  BIOS downgrade is another possible solution since you stated an earlier rev worked previously.

thanks i will give that a go