Official GIGABYTE Forum

Firmware Update and USB doesnt Power Down GA-Z170XP-SLI

Hargen

  • 3
  • 0
Firmware Update and USB doesnt Power Down GA-Z170XP-SLI
« on: April 06, 2017, 07:09:48 pm »
Hi all, I just updated my firmware and the USB doesnt power down my keyboard when i shut down. It worked fine before. What can i check if a setting has changed. I am using win 10

shadowsports

  • 2243
  • 67
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: Firmware Update and USB doesnt Power Down GA-Z170XP-SLI
« Reply #1 on: April 07, 2017, 02:20:58 am »
Hi all, I just updated my firmware and the USB doesnt power down my keyboard when i shut down. It worked fine before. What can i check if a setting has changed. I am using win 10

Not sure what "feature" or setting you are referring to? Are you saying your USB ports remain powered after the system is shutdown?
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W11
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W11
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW

Hargen

  • 3
  • 0
Re: Firmware Update and USB doesnt Power Down GA-Z170XP-SLI
« Reply #2 on: April 07, 2017, 12:25:43 pm »
Yes, in a nutshell. when i switch off the lights on my keyboard stay on. I have also noticed that my racing wheel also doesnt switch off completly. The power light on the wheel goes off but the fan still runs, before i updated everything shut off. I ave tried the USB suspension setting in windows and that did not change anything.

shadowsports

  • 2243
  • 67
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: Firmware Update and USB doesnt Power Down GA-Z170XP-SLI
« Reply #3 on: April 07, 2017, 06:42:07 pm »
Ah, got it.  This is definitely a BIOS related issue. 

Legacy USB Support - Try setting this to Disable and retest.  If that doesn't work, see if moving the wheel and keyboard to different ports helps.  If you are using a hub, remove it and connect directly to the boards ports.  Not a whole lot you can do in this situation if the ports remain powered after shutdown.  BIOS downgrade is another possible solution since you stated an earlier rev worked previously.   
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W11
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W11
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW

Hargen

  • 3
  • 0
Re: Firmware Update and USB doesnt Power Down GA-Z170XP-SLI
« Reply #4 on: April 17, 2017, 09:05:34 am »
Ah, got it.  This is definitely a BIOS related issue. 

Legacy USB Support - Try setting this to Disable and retest.  If that doesn't work, see if moving the wheel and keyboard to different ports helps.  If you are using a hub, remove it and connect directly to the boards ports.  Not a whole lot you can do in this situation if the ports remain powered after shutdown.  BIOS downgrade is another possible solution since you stated an earlier rev worked previously.

thanks i will give that a go