P67A-UD3-B3 PLEASE HELPPP !!

[kavrama]

GA-P67A-UD3-B3 problem please help !
Hello. My GA-P67A-UD3-B3 have troubles with the motherboard. I would be glad to help if I wrote down problems.
When will there be a stable version of the bios?
I had as BIOS version F2, I updated the bios F3 with the application when @ bios. Both have the same problems in bios.

1. Power button and the system BIOS logo screen opens, but as soon as 3 to 4 seconds, then turns back. (did only a few times)
2. Reset button and the system closes 25 -30 seconds remain closed until the reboot, the bios screen comes on and the normally open resetliyor again.
3. Save the default settings in the Bios say I went out. remained the same for all the settings I entered biosa restarts again did not return to the default settings.
4. Turn on Windows shuts down the computer screen but the chassis components is over I say, Windows continues to work 8 -10 seconds after the power cuts and the closing.
5. The system is slowing down for a while sometimes unusual, plus Windows 7 just before the opening welcome screen, black screen, waiting for up to 10 seconds after the Welcome yazısındada waiting for a very long time. (Windows 7 Ultimate Original)
6. SATAII disk when using AHCI mode, I wrote the above problems, but continues to hardware scan takes a long time. AHCI modem in order to solve the problem, when I ran the same ide fashion I went back to normal, I mean the default settings in the bios. Yapılıdeğil overclocking etc..
7. Although the computer is switched off and the rear panel, PS / 2 mouse or keyboard port on the device, the light stays on which it is attached mouse light remains on, especially the case necessarily pull the plug.
Power, reset, hdd, etc. cable I checked the wires again, all the right places, according to the booklet.
Please help...


-------------------------------------------------------------------------------
Model Name : GA-P67A-UD3-B3(rev. 1.x)
--------------------------
M/B Rev : 1.x
BIOS Ver : F3

-------------------------------------------------------------------------------
VGA Brand : GIGABYTE      Model : GTX460 768MB
CPU Brand : Intel      Model : CORE I5 2500K      Speed : 3.300 STOCK SPEED
Operation System : Win 7 64-bit      SP : 1
Memory Brand : G.SKİLL      Type : DDR3
Memory Size : 2X2GB DUAL CHANNEL      Speed : 1600MHZ 1.5V
Power Supply : 600 W


psu highpower 600w ( Peak 700w).
memory g.skill ram ddr3 2x2gb total 4gb dual channel 1600mhz 1.5v ripjawsx 9-9-9-24 Bios settings default.

[Dark Mantis]

Hi

OK. I get the genral idea now I think. Have you changed the mode from IDE to AHCI since installing Windows ?

If not try doing a complete CMOS clear and then loading Optimised BIOS Defaults.

Remove the power cable from the mains supply and then press the power switch on the case for a few seconds just to drain any residual energy in the PSU capacitors.

Once done remove the motherboard battery for at least one hour before replacing it.
 
Next plug back into the mains supply and boot.
 
You will now need to enter the BIOS by pressing DEL and load Opimised BIOS Defaults.

Make any other changes to the BIOS settings to suit your self like disabling the floppy drive, disabling the full screen logo and making the HDD the primary boot device and then press F10 to save and exit.

[Injen]

Mmmm may u also try write the F3 bios in backup rom?
During posting press alt+F12 and let it go till it finish.
Its just one mire idea!

[Dark Mantis]

Yes what Injen just said is a good idea and one I was going to mention next. He's just too fast for me. The only problem is if this BIOS is corrupt.

[Injen]

Hehehe,also now that i reread ur post,i actually believe its not a matter of bios settings,i think it might be a power matter like psu,what psu u have; is it new?how many devices u have on it?what is its output power?
Try with another one and plz repost m8.

[kavrama]

------------ 3. Save the default settings in the Bios say I went out. remained the same for all the settings I entered biosa restarts again did not return to the default settings. -------------  problem solved --- Updated to qflash bios f3. this problem solved.

Other problems continue...

psu highpower 600w ( Peak 700w). psu is good solid.
Experiment with different ram and psu did not change results.... help please...

[Dark Mantis]

Is this a new build ?

Has it worked properly since it was built and for how long ?

[kavrama]

motherbord + ram + cpu new . others equipment I bought 4 months ago.

[Dark Mantis]

I am sorry but you will have to try and be a little more clear in your answers. What are you saying "no" to?

[kavrama]

motherbord + ram + cpu new . others equipment I bought 4 months ago.

[Injen]

I do still highly believe its a power issue or maybe a heat one,i hope u already done what has to be done,memtest,aida or core temp with prime,furmark so that u can exclude parts.
Plus try to help ur self m8 by providing more clear details about what is happening so that we can help u.
 

[Injen]

I see in ur signature that u have gskill mems ripjaws these mems according to gskillhttp://www.gskill.com/news.php?index=223 they work at minimal 1.65v. 
You write 1.5v maybe u try to increase the voltage?

[Dark Mantis]

If it hasn't worked since you built it the best course of action might be to build it all up outside of the case just on the offchance that ther eis a short to the chassis.

Make sure that you observe anti-static precautions.

Lay some cardboard or use the motherboard box that is non-conductive on the worktop and remove the motherboard/CPU/heatsink/fan/buzzer/one stick of memory and PSU from the case and put it on the cardboard. Add the keyboard and now I know you haven't got any graphics but try and boot. The system should try and then fail emitting a series of beeps. Please post what sounds it makes.

[Lsdmeasap]

7. Although the computer is switched off and the rear panel, PS / 2 mouse or keyboard port on the device, the light stays on which it is attached mouse light remains on, especially the case necessarily pull the plug.
Power, reset, hdd, etc. cable I checked the wires again, all the right places, according to the booklet.

This is normal function of the board, the USB devices will remain powered due to the +5VSB rail on the power supply.   I am not certain, but I think PS/2 devices should be powered down though.   Are you sure you are shutting the system down, not putting it to sleep?   Default function of the power off button in windows vista or 7 is sleep until you manually change it to shut down instead.