Help Motherboard wont OC down to standard setting

[maxzuk]

Hi
Had system since May and had problem ONLY RECENTLY I really need to point that out because of the problem.

CPU :Intel 2600K 3.4

Memory :Kingston HyperX Genesis Grey 8GB (2x4GB) DDR3 PC3-12800C9 1600MHz Dual Channel Kit (KHX1600C9D3X2K2/8GX)

Motherboard: Gigabyte P67A-UD3-B3 Intel P67 Chipset (Socket 1155) DDR3 Motherboard - (Sandybridge) ** B3 REVISION **

Problem is my system wont clock back to 3.4

When you either put x16 on memory to get 1600mhz memory speed or just use profile 1 and leave everything on auto CPU ramps up to 3.8.

Thanks in advance Nigel

Was fine doing this for ages so HELP

CPU runs fine at 3.8 but am having problems with new graphics card not being 100% stable so rule 1 for me is stop OC everything.

It may have started doing this about the time I put F5 bios on but not sure as didnt notice problem and put F6 on last night and still no change.

Thanks for reading Nigel

[maxzuk]

Fixed issue by flashing bios back to F4

[Dark Mantis]

Hi and welcome.

I couldn't find Nigel but thought I would post anyway! Glad to see that you found the issue and soon fixed it. BIOS updates can sometimes create more problems than they solve but it is not the norm.