Official GIGABYTE Forum

Z68X-UD3H-B3 USB 3.0 BSOD

Z68X-UD3H-B3 USB 3.0 BSOD
« on: January 01, 2012, 01:43:37 am »
Hello,

I'm running a new rig with a 2500k, Corsair Force 3 90GB SATA 3 SSD,  8GB G.Skill sniper low profile RAM, new OCZ Z-Series 850w PSU, and a GTX 460 (other 460 needs to be RMA'd). Whenever I want to play a game on Steam, I get BSOD's when my Turtle Beach PX21's are plugged in the front USB 3.0 ports. I get a BSOD blaming EtronXHCI.sys. This also happens sometimes when I plug in my Rosewill external hard drive. My drivers are updated from the Gigabyte website- version 105. Is there a solution to this problem?

Gloup_Gloup

  • 982
  • 33
  • Let us sweet between members, on the forum.
Re: Z68X-UD3H-B3 USB 3.0 BSOD
« Reply #1 on: January 01, 2012, 06:20:06 am »
Hi FixieKidBill,  ;)

Welcome to forum,

Have you tried in the Rear (Back Panel) USB ports?
Have you activate a USB3 in BIOS?
Have you a same problem with a Back panel USB2 ports?

Manual here:
http://www.turtlebeach.com/support/index.php?View=download&EntryID=1067

Have you read this FAQ about your product?
http://www.turtlebeach.com/products/ps3-gaming-headsets/ear-force-px21.aspx

Have you see the forum here:
http://www.turtlebeach.com/support/index.php?CategoryID=1067

I add a picture about your Turtle Beach PX21.
For other persons. (Helper members).

Last question: What is your game or games you playing on Steam? What Game cause a BSOD? Have you a Error Message? Like a DRIVER_IRQL_NOT_LESS_OR_EQUAL or anything...

EDIT01: Install this software and give us a report.txt
http://www.resplendence.com/download/whocrashedSetup.exe

Gloup_Gloup
« Last Edit: January 01, 2012, 06:50:26 am by Gloup_Gloup »

Re: Z68X-UD3H-B3 USB 3.0 BSOD
« Reply #2 on: January 01, 2012, 07:52:31 am »
Hello Gloup_Gloup,

Yes, my device works via USB 2.0 in the back. Yes, USB 3.0 is enabled in the BIOS. Although I am not trying to obtain USB 3.0 speeds, I would like to use the front two USB ports on my Corsair 500R for ALL USB devices, USB 2.0 and 3.0. I get BSOD's when I just plug in the Turtle Beach headset in the USB 3.0 port. If I'm lucky, it will not crash; however when I launch a game, such as TF2, I get a BSOD.  I have attached the crash report.

Gloup_Gloup

  • 982
  • 33
  • Let us sweet between members, on the forum.
Re: Z68X-UD3H-B3 USB 3.0 BSOD
« Reply #3 on: January 01, 2012, 08:36:59 am »
Hello Gloup_Gloup,

Yes, my device works via USB 2.0 in the back. Yes, USB 3.0 is enabled in the BIOS. Although I am not trying to obtain USB 3.0 speeds, I would like to use the front two USB ports on my Corsair 500R for ALL USB devices, USB 2.0 and 3.0. I get BSOD's when I just plug in the Turtle Beach headset in the USB 3.0 port. If I'm lucky, it will not crash; however when I launch a game, such as TF2, I get a BSOD.  I have attached the crash report.

Hi FixieKidBill,

I have do not read, at this moment, the CrashReport... so check my add ''EDIT01:'' in this post or Topic. In more later, when I have read.

So I suggest you to verify with Corsair Website. (Technical service by exemple...) if your USB3 in Front panel it is indeed the signal USB3. Sometimes this is not the case.

I find a infos about Etron USB3 here:
http://www.etron.com/SystemICs-detal.php?ID=1

Otherwise I find new drivers on this web site:
http://www.station-drivers.com/page/etron.htm

Version 107.

Gloup_Gloup

Re: Z68X-UD3H-B3 USB 3.0 BSOD
« Reply #4 on: January 01, 2012, 08:25:57 pm »
Hello,

I've updated my drivers. I still get BSOD. My front USB ports are indeed USB 3.0. I believe a RMA is in order.

Gloup_Gloup

  • 982
  • 33
  • Let us sweet between members, on the forum.
Re: Z68X-UD3H-B3 USB 3.0 BSOD
« Reply #5 on: January 02, 2012, 07:04:56 am »
Hello,

I've updated my drivers. I still get BSOD. My front USB ports are indeed USB 3.0. I believe a RMA is in order.

Hi FixieKidBill,  ;)

What is the Error Message on BSOD?  And the Number code :  Like 0x000000E
What is the file indicate? Like  :  nvlddmkm.sys

Gloup_Gloup

Re: Z68X-UD3H-B3 USB 3.0 BSOD
« Reply #6 on: January 02, 2012, 10:59:41 pm »
See attached.

Gloup_Gloup

  • 982
  • 33
  • Let us sweet between members, on the forum.
Re: Z68X-UD3H-B3 USB 3.0 BSOD
« Reply #7 on: January 02, 2012, 11:09:43 pm »
Hi FixieKidBill,  ;)

See here infos about your situation:

How do I resolve the Driver IRQL NOT LESS OR EQUAL error?
http://answers.microsoft.com/en-us/windows/forum/windows_7-system/how-do-i-resolve-the-driver-irql-not-less-or-equal/9ce7cb26-e8be-484a-a76f-769fac72aed0?tab=MoreHelp&page=1

Gloup_Gloup

Re: Z68X-UD3H-B3 USB 3.0 BSOD
« Reply #8 on: January 03, 2012, 01:47:42 am »
I am unable to download the hotfix.

Gloup_Gloup

  • 982
  • 33
  • Let us sweet between members, on the forum.
Re: Z68X-UD3H-B3 USB 3.0 BSOD
« Reply #9 on: January 04, 2012, 01:15:34 pm »
I am unable to download the hotfix.

Hi FixieKidBill,

The microsoft web link is very very slow, I try it...

So in wait time, you have a posibility to use a link in this place:

http://answers.microsoft.com/en-us/windows/forum/windows_7-system/how-do-i-resolve-the-driver-irql-not-less-or-equal/9ce7cb26-e8be-484a-a76f-769fac72aed0?tab=MoreHelp&page=1

Otherwise by google with key word.

Gloup_Gloup

Re: Z68X-UD3H-B3 USB 3.0 BSOD
« Reply #10 on: January 12, 2012, 02:27:47 am »
Hi FixieKidBill,

Did you manage to find a solution to this problem?
Thanks

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: Z68X-UD3H-B3 USB 3.0 BSOD
« Reply #11 on: January 12, 2012, 05:39:38 am »
Hello,

I'm running a new rig with a 2500k, Corsair Force 3 90GB SATA 3 SSD,  8GB G.Skill sniper low profile RAM, new OCZ Z-Series 850w PSU, and a GTX 460 (other 460 needs to be RMA'd). Whenever I want to play a game on Steam, I get BSOD's when my Turtle Beach PX21's are plugged in the front USB 3.0 ports. I get a BSOD blaming EtronXHCI.sys. This also happens sometimes when I plug in my Rosewill external hard drive. My drivers are updated from the Gigabyte website- version 105. Is there a solution to this problem?

Hi

Your STOP code on the BSOD normally points towards an increase in your QPI/Vtt voltage being necessary.

I would advise you to try using the rear USB ports and they all should work as long as the USB3.0 option is enabled in the BIOS as all ports and cables should be backwards compatible. If you get it all running ok then you can try and switch them to the fornt ports but the main thing is functionallity first.

If the option is enabled in the BIOS and the correct drivers are loaded then if it still doesn't work I would say you have a fault somewhere. :-\
« Last Edit: January 12, 2012, 05:43:35 am by Dark Mantis »
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Fatman

  • 523
  • 18
Re: Z68X-UD3H-B3 USB 3.0 BSOD
« Reply #12 on: January 12, 2012, 05:55:21 am »
You could try re-installing/repairing the etron drivers.

kolos

  • 2
  • 0
Re: Z68X-UD3H-B3 USB 3.0 BSOD
« Reply #13 on: June 11, 2012, 06:49:11 pm »
I know this is an old thred, but maybe others will reach this site.
The issue is caused by the Etron USB 3.0 host controller (EJ168A).
Read this posting, Russian roulette style USB 3.0 connectivity and BSOD heaven???
http://www.xtremesystems.org/forums/showthread.php?265903-Asrock-P67-Extreme4-UEFI-amp-Drivers-thread-Extreme6-amp-Pro3-owners-welcome&p=5100398&viewfull=1#post5100398

Re: Z68X-UD3H-B3 USB 3.0 BSOD
« Reply #14 on: August 14, 2012, 03:42:54 am »
Hello,

I'm running a new rig with a 2500k, Corsair Force 3 90GB SATA 3 SSD,  8GB G.Skill sniper low profile RAM, new OCZ Z-Series 850w PSU, and a GTX 460 (other 460 needs to be RMA'd). Whenever I want to play a game on Steam, I get BSOD's when my Turtle Beach PX21's are plugged in the front USB 3.0 ports. I get a BSOD blaming EtronXHCI.sys. This also happens sometimes when I plug in my Rosewill external hard drive. My drivers are updated from the Gigabyte website- version 105. Is there a solution to this problem?

Hi

Your STOP code on the BSOD normally points towards an increase in your QPI/Vtt voltage being necessary.

I would advise you to try using the rear USB ports and they all should work as long as the USB3.0 option is enabled in the BIOS as all ports and cables should be backwards compatible. If you get it all running ok then you can try and switch them to the fornt ports but the main thing is functionallity first.

If the option is enabled in the BIOS and the correct drivers are loaded then if it still doesn't work I would say you have a fault somewhere. :-\

I've received a replacement board from Gigabyte. My BIOS is U1H now (UEFI BIOS). I still have issues with my USB 3.0 ports. The driver version is .113.

I'll plug in my ADATA S102 32GB USB 3.0 flash drive in the front USB 3.0 port on my Corsair 500R utilizing the 20 pin USB 3.0 header, and when copying any file to and from the drive, Windows shows as if there was nothing in the drive. I'm 100% certain there is data on my ADATA drive.

It appears that the rear USB 3.0 port works. My qualms are with the front port USB 3.0. What can I do about this persistent issue?

Also, I've ran ATTO benchmark on my ADATA drive on the two front USB 3.0 ports. The first left 3.0 port seems to not be functioning at 100%- I get a maximum transfer rate of 42MB/sec read, 30MB/sec write. The other front 3.0 port seems to be functioning at full speeds. I've ran another test utilizing the 3.0 port on the rear part of my motherboard, and results are similar to the right front 3.0 port.
« Last Edit: August 14, 2012, 04:19:02 am by FixieKidBill »