Official GIGABYTE Forum

GA-Z77-D3H differences between v1.0 and 1.1

ASH

  • 2
  • 0
GA-Z77-D3H differences between v1.0 and 1.1
« on: August 23, 2012, 12:46:44 pm »
What are they ?

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GA-Z77-D3H differences between v1.0 and 1.1
« Reply #1 on: August 23, 2012, 08:48:21 pm »
Hi

Quite often there are few if any noticable differences between revisions. It maybe something as small as the make of a particular chip has changed.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Del

  • 28
  • 0
Re: GA-Z77-D3H differences between v1.0 and 1.1
« Reply #2 on: August 24, 2012, 10:01:22 am »
It would seem that all Z77 have a new 1.1 revision , mabie this is the fix for the faulty boards they have been selling.

I have an unusable GA-Z77-DH3 rev 1.0 as do many others , will we be able to RMA and get the fixed boards I wonder, :-\

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GA-Z77-D3H differences between v1.0 and 1.1
« Reply #3 on: August 24, 2012, 10:09:06 am »
If you have a specific problem then members of the forum will help you to find a cure for it if possible. If not then you can arrange an RMA to have the board repaired/replaced.

You can contact GGTS for help too here :

Just enter your email address and click on the language of choice. For the UK:


GGTS   http://ggts.gigabyte.com/

http://uk.gigabyte.com/support-downloads/support-downloads.aspx

Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Del

  • 28
  • 0
Re: GA-Z77-D3H differences between v1.0 and 1.1
« Reply #4 on: August 24, 2012, 10:21:21 am »
Thank you Dark Mantis.
I have already been in contact with GGTS and all they can say is take it up with the vendor I purchased the board from, they will replace with same rev 1.0.

The board works fine with F10 BIOS it was shipped with , but Ivy bridge functions do not work with F10.

When I updated the BIOS to F14 it killed my RAM (Auto settings default values loaded) so don't want to test it again as its costing me ££ now.

looks like I'm going to lose out here. :((

Edit: BIOS version.



« Last Edit: August 24, 2012, 02:15:49 pm by Del »

Re: GA-Z77-D3H differences between v1.0 and 1.1
« Reply #5 on: November 16, 2012, 08:35:38 pm »
Yes, i have the same problem with an ivy bridge, with the amount of issues Gigabyte seems to be having with this models, they should make public what changed with the revision.