Hello there
Im new to this forum and im new to Gigabyte all together.
Im getting the Gigabyte GA-X79-UP4, Socket-2011 tomorrow so i was just wondering which drivers i should be installing ?
On the link page theres 2 diffrent with same date on chipset and 6 diffrent of ISATA RAID/AHC.
Im guessing im getting the newest date but seeing as the chipsets have same date but diffrent names and all the ISATA RAID/AHCI are diffrent i figured id ask.
Which drivers should i get and is there soemthign i should know about these ?:
Chipset:
Intel Management Engine Interface 7.1.52.1176 6.17 MB 2012/10/23
Intel INF installation 9.3.0.1021 1.24 MB 2012/10/23
ISATA RAID/AHCI:
Intel Rapid Storage Technology with Smart Response support (need to update latest BIOS first) 11.6 10.70 MB 2012/11/22
Marvell Preinstall Driver Note: Press F6 during Windows setup to read from floppy1.2.0.1020 0.42 MB 2012/10/04
Marvell Storage Utility 4.1.0.2013 42.35 MB 2012/10/03
Marvell SATA Controller Driver 1.2.0.1020 1.28 MB 2012/10/03
Theres more of these drivers but i figured anythign less than 2 months old of the same type wouldnt be the best to get.
Specs:
Motherbored: Gigabyte GA-X79-UP4, Socket-2011
Ram: Kingston DDR3 HyperX Beast 16GB 2133Mhz
Processor: Intel® Core i7-3820 Processor
Game drive: Intel® SSD 330 Series 180GB 2.5", 25nm
Windows Drive: Kingston HyperX 3K SSD 120GB 2.5"
Windows: Windows 7 ultimate 64
Grafic card: EVGA GTX 570
CPU Cooler: Corsair H70 cooler + 2x SP120 Quiet Edt.
Any Info or tips would be great
