Hello
I just got my custom PC in the mail from CyberPowerPC
I didn't wanna buy windows 7 so it didn't come with an OS
I do have Windows XP x64 Edition tho
Windows Setup kept getting stopped at a blue screen,
that blue screen read:
"a problem has been detected and windows has been shut down to prevent damage to your computer"
I read that if you change the SATA mode to IDE from AHCI, windows could install and that screen wouldn't come up.
So that's what I did.
But later, I learned that AHCI is actually good if you have an SSD drive, which I do, and is my primary drive. Along with an HDD for my secondary.
So I formatted both drives and am trying to install Windows again, this time with AHCI enabled.
And that's where I'm at now.
I'm trying to slipstream this:
Intel SATA Preinstall driver
(For AHCI / RAID Mode)
Note: Press F6 during Windows setup to read from floppy.
http://download.gigabyte.us/FileList/Driver/mb_driver_intel_bootdisk_irst_64_xp_7series.exewith my Windows setup disc via nLite.
Is that the way to go about it ?
