Official GIGABYTE Forum

Bios settings on G1 Sniper M3 rev 1.0 MB

Graceman

  • 200
  • 1
Bios settings on G1 Sniper M3 rev 1.0 MB
« on: January 22, 2013, 02:01:30 pm »
I have now got my new board running just the board with no added Hard Drives yet , this is because I lost the install disc for my Revo PCIe card.
So I have spent the time working through the Bios

I have found two undocumented settings under the under the Bios Features Page called CSM support and Network Stack anyone know what these are for and do.

Bios version is F5  should I upgrade ?

Also on this board there does not seem to be any led lights is this correct or am I missing something my GA-X58Audr3  MB had lights all over the place.
« Last Edit: January 22, 2013, 02:04:27 pm by Graceman »
Antec NSK4000B II Midi Tower Case
Gigabyte G1 Sniper M3 rv 1.0
I7/3770K
16Gb Csair Vengance Ram
Corsair CMPSU-430CXV2UK PSU  CX430V2  
OCZ RVD3-FHPX4-240G 240GB RevoDrive3 PCI-E SSD

Alcool DC-LT 12v Ceramic Pump
Alcool Rvoir for DC-LT Pump
Alcool DC-LT Pump Top
EK Supremacy CSQ Univ Full

Re: Bios settings on G1 Sniper M3 rev 1.0 MB
« Reply #1 on: January 23, 2013, 08:36:35 pm »
I had a Gigabyte X58-UD5 and it had little led lites all over the place,but my Gigabyte X79-UD5 just has one lite and it is the power button on the board.

pstlouis

  • 10
  • 0
Re: Bios settings on G1 Sniper M3 rev 1.0 MB
« Reply #2 on: January 24, 2013, 06:23:53 am »
I have now got my new board running just the board with no added Hard Drives yet , this is because I lost the install disc for my Revo PCIe card.
So I have spent the time working through the Bios

I have found two undocumented settings under the under the Bios Features Page called CSM support and Network Stack anyone know what these are for and do.

Bios version is F5  should I upgrade ?

Also on this board there does not seem to be any led lights is this correct or am I missing something my GA-X58Audr3  MB had lights all over the place.

first upgrade your bios to F10C. I update my bios to that  revision and it fix a lot of problem. There is no led that lit from the motherboard.Get the manual from the gigabyte site and you will noticed that there is no led.

Graceman

  • 200
  • 1
Re: Bios settings on G1 Sniper M3 rev 1.0 MB
« Reply #3 on: January 24, 2013, 10:23:36 pm »
Does anyone know what these Bios settings are for.

I have found two undocumented settings under the under the Bios Features Page called CSM support and Network Stack anyone know what these are for and do.
Antec NSK4000B II Midi Tower Case
Gigabyte G1 Sniper M3 rv 1.0
I7/3770K
16Gb Csair Vengance Ram
Corsair CMPSU-430CXV2UK PSU  CX430V2  
OCZ RVD3-FHPX4-240G 240GB RevoDrive3 PCI-E SSD

Alcool DC-LT 12v Ceramic Pump
Alcool Rvoir for DC-LT Pump
Alcool DC-LT Pump Top
EK Supremacy CSQ Univ Full