Quick run down of components:
R5 1600
AB350M-Gaming 3
G Skill Fortis DD4 8GB x 2 2400mhz
Sapphire RX 580
EVGA NEX 650
Factual Design R4
Samsung EVO 850 500gb SSD
WD 1TB Blue
I am trying to get into the BIOS to set boot priority but when I have my SSD/HHD/DVD drives plugged into the SATA 6 or SATA 3 lanes it will always skip the splash screen and go straight to "Reboot and select proper boot device" screen. I figured out that I can access the BIOS if I have all of the SATA devices unplugged. But, when I get into that BIOS the Boot priority area is blank. Not sure what I am doing wrong here. Any thoughts/suggestions would be helpful.
I have tried 1 stick of RAM in DIMM 1/2/3/4 etc. As well as taking everything out and putting it back in to make sure no extra standoffs were in or extra screws.
