« previous next »

Pages: [1] Go Down

Problem with GA-970A-DS3 setting ram to 1866mhz

patrick716

2
0

Problem with GA-970A-DS3 setting ram to 1866mhz

« on: April 25, 2013, 10:06:49 am »

Hey Guys
so i have a GA-970A-DS3 with amd fx6100 black edition. My problem is ive got some ballistix ram clocked at 1866mhz but my motherboard is only picking it up as 1333mhz how can i change this please help.

Thank you

Logged

Vezina

871
10
If it s not broken, fix it until it is !

Re: Problem with GA-970A-DS3 setting ram to 1866mhz

« Reply #1 on: April 25, 2013, 03:06:42 pm »

And the revision of the board is ?!

The setting is there , in the BIOS ,just look for it.

Logged

Over & Out !

AMD FX (APU-s included) users should install - KB2645594 & KB2646060 under Windows 7

1.ASUS Sabertooth 990FX 2.0 + FX 6300 + H60
2.MSI A88X-G41 PC Mate + A8 5600K + Hyper TX 2
3.Gigabyte F2A75-D3H + A4 5300
4.ASUS AM1M-A + Athlon 5150

patrick716

2
0

Re: Problem with GA-970A-DS3 setting ram to 1866mhz

« Reply #2 on: April 25, 2013, 10:20:02 pm »

emr i dont know the most up to date one. i changed it to 1866mhz then when i restart the computer say boot fail because of last change in the bios??

Logged

Vezina

871
10
If it s not broken, fix it until it is !

Re: Problem with GA-970A-DS3 setting ram to 1866mhz

« Reply #3 on: April 28, 2013, 06:01:47 pm »

Set DDR voltage to 1,65V and try again.

Logged

Over & Out !

AMD FX (APU-s included) users should install - KB2645594 & KB2646060 under Windows 7

1.ASUS Sabertooth 990FX 2.0 + FX 6300 + H60
2.MSI A88X-G41 PC Mate + A8 5600K + Hyper TX 2
3.Gigabyte F2A75-D3H + A4 5300
4.ASUS AM1M-A + Athlon 5150

Pages: [1] Go Up

« previous next »