Official GIGABYTE Forum

Which RAM Haswell Z87M-D3H?

beenie

  • 13
  • 0
Which RAM Haswell Z87M-D3H?
« on: June 19, 2013, 07:24:27 am »
Gigabyte doesn't seem to have a recommended RAM list.

is 1.5v okay, and this RAM module?

KVR16N11S8/4

4GB 1600MHz DDR3 Non-ECC CL11 DIMM SR (512x8)

ex58

  • 854
  • 37
« Last Edit: June 19, 2013, 02:57:04 pm by ex58 »

dmdilks

  • 3093
  • 43
  • "If it isn't broke don't fix it"
    • http://dmdcomputerservice.webs.com/
Re: Which RAM Haswell Z87M-D3H?
« Reply #2 on: June 19, 2013, 04:28:38 pm »
4GB 1600MHz DDR3 Non-ECC CL11 DIMM SR (512x8)

What you are saying you have 8 sticks of memory. If so you can only use 4 of them and that would be 2gbs.
X299X Aorus Master, i9-9940x-3.30Ghz, 64gb G-Skill DDR4-2400, MSI RTX-3070 8GB, Cooler Master case, Thermal-take PSU 850w, 1-M2-NMVe SSD-512gb, 3-Pny 1TB SSD, 2-WD Raptors 1TB, Win 10 pro 64bit, Asus 35" 144Mhz Monitor.

ex58

  • 854
  • 37
Re: Which RAM Haswell Z87M-D3H?
« Reply #3 on: June 19, 2013, 05:19:59 pm »
(512x8) is 8 chips X 512KB = ~4GB ...1 memory stick.  ;)

beenie

  • 13
  • 0
Re: Which RAM Haswell Z87M-D3H?
« Reply #4 on: June 20, 2013, 12:32:14 pm »
it's the same old story. Not one of the RAM modules on that PDF is available at any of the distributors. I always have this problem. So I end up with port in a storm. This is a Gigabyte forum, why can't someone tell me which RAM to use and instead of sending off to lala land with no result.

Gloup_Gloup

  • 982
  • 33
  • Let us sweet between members, on the forum.
Re: Which RAM Haswell Z87M-D3H?
« Reply #5 on: June 20, 2013, 01:01:54 pm »
Hi beenie,

I check infos about your RAM:
http://www.kingston.com/datasheets/KVR16N11S8_4.pdf

The SPD is programmed to JEDEC standard latency DDR3-1600
timing of 11-11-11 at 1.5V.

In bios, in the SPD section for Ram....
set for 1600mhz
If with this timing 11-11-11-24or30, the RAM are not funtionnal...
Change timing for 9-11-10-28 or if fail ....
timing 9-9-9-27

Your RAM are not XMP compatible...
So , use a SPD section, not a XMP section.

Maybe if fail, change a slot of Ram on the motherboard.
« Last Edit: June 20, 2013, 01:06:10 pm by Gloup_Gloup »