Hi Guys,
I have just built a HTPC with the: GA-F2A75M-D3H motherboard
(SPECS)
AMD A10 5800K Black Edition 3.8GHz Socket FM2 4MB L2 Cache Retail Boxed Processor
Crucial 8GB (2x4GB) DDR3 1600Mhz Ballistix Tactical Memory Kit CL8 (8-8-8-24) 1.5V
Gigabyte GA-F2A75M-D3H A75 Socket FM2 VGA DVI HDMI 7.1 Channel Audio mATX Motherboard
WD 7200RPM 1tb X2 Sata Raid 0 Array.
Corsair HX 750w PSU.
On first Boot, the raid controller does not detect my raid array. (Raid0 WD 2X 1tb Sata 7200rpm.).
If I then Ctrl-Alt-Del / soft restart, the raid array is detected and boots to my OS (Array is boot disk).
I have cleared CMOS, updated to latest Bios, no luck....
I am looking to RMA, however wondered whether anyone had an idea what could be causing this before I do so, as I fear the new board might have the same issue?
Thanks in advance.
