Thanks for the tip. In the System Log, on boot, I'm getting 4 disk errors. Except for a forced power off error (from a failed chipset driver update) there are no other errors. All 4 are:
"The driver detected a controller error on \Device\Harddisk1\DR1"
The 4 errors happen one after the other.
My first build was on a new SSD. My second fresh build was using a new, typical SATA3 drive. New bad hard drives are rare. Two in a row would be very unlikely. I have another and don't mind trying, but I think the problem is elsewhere.
In case I'm looking at the wrong place, is there a way to see what process is taking so long? I don't see where the time to load is shown for each item. I tried adding Processor, Kernal, and User Times to the columns, but they're all blank.
Thanks in advance for any insight.