GA-73pvm-s2h - no display - no beep on post, no beeps when ram removed etc

[LithiumKid1976]

hi
my GA-73pvm-s2h is currently not working.

its not sending out a display to the monitor.

ive reseated all the memory and cards etc, but its still doint the same.

when i remove the ram, and try to boot, it doesnt give me any beeps, which i thought it would... or should do ??

what should i check next to see if the motherboard is still ok?

thanks
LK1976

[LithiumKid1976]

this sorted my problem,  step 3...

1) Remove the M/B from the case.
2) Only install the basic components on the motherboard – CPU, CPU cooling fan, one memory module, VGA card (if there is no VGA onboard) and power supply.
3) Reset the CMOS once - Disconnect the power cord from the power supply & detach the CMOS battery for 5 minutes then put it back.
4) Connect the internal speaker.
5) Turn on the power to see your system can power up.

hope this helps.

[crispert]

Thank you for sharing.
I had the same problem with my old GA-K8N-SLI card after a power supply failure and resetting the CMOS worked.