Please one minute X58A-UD3R rev2

[JordiBCN]

I have a problem with my mother board, I configured the SSD in Sata3 ports 6/7 how AHCI but when promt in bios show me SSD how IDE and when I enter to windows the SSD devices are SCSI, I configure correctly my SSDs


thanks for your patience and please bring me a solution.

[dmdilks]

Where are you setting up the controller on? Intel or Marvell. Those are Marvell controllers.

[JordiBCN]

First thanks for reply

Marvell and SSD read/write is not faster

[dmdilks]

Marvell and SSD read/write is not faster 

Don't understand what you are saying

1. The blue ports are sata2 ports Intel

2. The white ports are sata3 ports Marvell.

If you are running a SSD that is sata3 it has to run on the Marvell controller.

On that board the Marvell controller is the fastest controller on that board. Sata3 6gbs.

When in windows it will show your sata3 drive as SCSI and the sata2 as ATA.

Plus if you install windows as a IDE controller. You what to change it to AHCI in the bios the computer might not boot to windows.

You might have to do this first. http://forums.guru3d.com/showthread.php?t=313676