Official GIGABYTE Forum

GA-X58A-UD3R Win7-64 reinstall on new SSD

Re: GA-X58A-UD3R Win7-64 reinstall on new SSD
« Reply #15 on: December 27, 2013, 03:23:53 pm »
The info on that boot screen for RAID ID 0 &1, physical disks 0 & 1 and 4 & 5 is correct. It's physical disks 2 & 3 which are not correct. Those drives are no longer part of a RAID array, and the reported size is incorrect. They are 3 TB drives, which Intel Storage Manager reports as 2.7 TB, and also reports as part of a working RAID 1 array (Array_0001).

I may disconnect the SSD from the Marvel controller temporarily to see what shows up on the boot screen and in the RAID BIOS.

Re: GA-X58A-UD3R Win7-64 reinstall on new SSD
« Reply #16 on: December 27, 2013, 04:24:17 pm »
Turns out the problem was my BIOS was too old and it didn't support drives larger than 2 TB. I upgraded the BIOS to the latest version but the two 3 TB drives are not in a RIAD array.

Intel Storage Manager gives the option of creating the array and preserving the option from one of the two disks. Will that work?

dmdilks

  • 3085
  • 43
  • "If it isn't broke don't fix it"
    • http://dmdcomputerservice.webs.com/
Re: GA-X58A-UD3R Win7-64 reinstall on new SSD
« Reply #17 on: December 27, 2013, 04:44:08 pm »
Intel Storage Manager gives the option of creating the array and preserving the option from one of the two disks. Will that work?

It might because you are doing a mirror array's they work different than stripe array.

That is why they give that mirror array so if one drive goes bad you can change and rebuild it.

 



X299X Aorus Master, i9-9940x-3.30Ghz, 64gb G-Skill DDR4-2400, MSI RTX-3070 8GB, Cooler Master case, Thermal-take PSU 850w, 1-M2-NMVe SSD-512gb, 3-Pny 1TB SSD, 2-WD Raptors 1TB, Win 10 pro 64bit, Asus 35" 144Mhz Monitor.

Re: GA-X58A-UD3R Win7-64 reinstall on new SSD
« Reply #18 on: December 29, 2013, 12:03:54 am »
The RAID volume rebuild with Intel Storage Manager worked, and maintained the contents of the drive(s). I ran to Wal-Mart and snagged a 3 TB external drive (surprisingly inexpensive) to backup the RAID rive contents first, just to be safe. Those external HD's sure are SLOW!

I had to upgrade the BIOS to use drives greater than 2 TB when I originally installed the 3 TB drives, so I don’t know why I had to do another BIOS upgrade, because all I did was disconnect all the drives while I was installing Windows on the SSD. I reconnected them exactly the same way immediately after the Windows installation.
 
But it’s over now and it’s a big relief. I’m 99% back up and running. Just a couple minor infrequently used apps to install. I’m not sure operation with the SSD is significantly (noticeably) faster than when the computer was new, running from a conventional HD. And it positively doesn’t shut down near as fast as it did when it was new. But shut down is a non issue, and it’s good to have a new-like, responsive system again  :)

Many many thanks for all the assistance!

dmdilks

  • 3085
  • 43
  • "If it isn't broke don't fix it"
    • http://dmdcomputerservice.webs.com/
Re: GA-X58A-UD3R Win7-64 reinstall on new SSD
« Reply #19 on: December 29, 2013, 02:07:32 am »
Now that you are up and running here is a site so you can do some tweaks. Windows & SSD You don't have to do all of them too.

http://www.ocztechnologyforum.com/forum/showthread.php?63273-*-Windows-7-Ultimate-Tweaks-amp-Utilities-*

One thing I do is shut off as much stuff as I can. Right click on my computer / Properties / advanced system settings / performance / settings / adjust for best performance.

Yes it will change the desktop but you can change it back. Plus I use msconfig / startup and stuff in there too.
« Last Edit: December 29, 2013, 02:08:51 am by dmdilks »
X299X Aorus Master, i9-9940x-3.30Ghz, 64gb G-Skill DDR4-2400, MSI RTX-3070 8GB, Cooler Master case, Thermal-take PSU 850w, 1-M2-NMVe SSD-512gb, 3-Pny 1TB SSD, 2-WD Raptors 1TB, Win 10 pro 64bit, Asus 35" 144Mhz Monitor.

Re: GA-X58A-UD3R Win7-64 reinstall on new SSD
« Reply #20 on: December 30, 2013, 01:47:20 am »
Thanks for the tip. I'll check it out.