GIGABYTE PSU replacement black screws

[gilgamesh]

Dear Gigabyte

This is not a RMA this is my own silly fault and i am willing to pay for the parts.

I have a GIGABYTE ODIN 1200W PSU ( i beleive its  a SUNWIN rebrand) when I reviewed it a loooooooong time ago, I took off the cover to photograph the capacitors. However silly me I lost four of the black screws which hold down the top cover. Is it possible to order replacements please?

gilgamesh

[gilgamesh]

Irealise its only screws, but i vcannot for the life of me find the correct size, thread  for it

[RatsAss]

I think the screws that fasten the motherboard to your case will fit.

Or the screws that hold your hard drives in place.  If you have spares you could try them.

If not,maybe you could find some old radio or electronic device and cannabalize it for screws.

Good luck.

[gilgamesh]

I think the screws that fasten the motherboard to your case will fit.

Or the screws that hold your hard drives in place.  If you have spares you could try them.

If not,maybe you could find some old radio or electronic device and cannabalize it for screws.

Good luck.

tried the above, hdd screws are 6/32 thread and they dont work also truied motherboard screws, those are too long and wrong thread, and not black:(

In essence im looking for the same black screws.

cheers buddy for your help

[runn3R]

Hi gilgamesh

Please check with our RMA dept if they have any spare ones available, the address is: returns@gbt-tech.co.uk

[gilgamesh]

Hi gilgamesh

Please check with our RMA dept if they have any spare ones available, the address is: returns@gbt-tech.co.uk

thank you very much Runn3r

[gilgamesh]

Hi gilgamesh

Please check with our RMA dept if they have any spare ones available, the address is: returns@gbt-tech.co.uk

thank you very much Runn3r

Hello there can you please close this call, iu found some scrfews that will do the job