Questions about GIGABYTE products > X99 Motherboards

X99-UD4 endless boot cycle, ram to blame?

<< < (2/2)

qwerty:
Who did you speak with, can you point me in the right direction. I'm still having RAM woes, can only get past POST with 1xDIMM

wobble64:
Well, by "spoke" I meant I created a ticket and they replied  :)

You can do the same here at the bottom half of the page: http://www.gigabyte.com/support-downloads/support-downloads.aspx

In my case they replied within 12-24 hours, so just be patient.

qwerty:
Thanks mate, appreciate it!

dmdilks:
The thing is that when you install the memory it auto picks it up. I had to do nothing to set the memory it pick it up at 2133.

So what might be happening is it could be the same thing. Any thing over 2133 you will have to OC your CPU just a little to get them to work.

Yes one stick might work but when you start adding more memory. Your CPU has to work just a little harder to get them to work.

What does it say in the bios on the memory speed. If it is picking them up at 2400 try to under clock them to 2133 to see if it will work.

Navigation

[0] Message Index

[*] Previous page