Hi,
I've just bought one of these board and I'm pretty happy with it so far, but there's one thing that is printed in the manual and I haven't been able to use, that's the Window mode bios; I've tried pressing F2 and other keys but the only bios that seems to be present is the Classic mode one; the bios that I'm currently using is the one that the board came with (F3), since the changes in the F4 revisión didn't affect me (I don't have a K CPU). Is that right or am I missing something?.
And another doubt; I want to undervolt the CPU a little, just by -0.05 or -0.10 volts, but in the MIT menu it forces to set an initial voltage value, Is that right or there's some workaround, since with other boards it's posible to just set a negative offset without touching anything else.
And a final question; does the bios on this board reset to default after a number of unsucessful boot attemps? (for example an overclocking failure or some other wrong setting), this is important for me because I have the board mounted in a very small enclosure that is quite difficult to assemble and the cmos reset pins are inaccesible (I would have to disassemble everything to be able to do it).
Thanks.