Official GIGABYTE Forum
  1. Official GIGABYTE Forum
  2. Questions about GIGABYTE products
  3. Motherboards with Intel processors
  4. GA-Z97-HD3: RAID failed after update from F4 to F5
« previous next »
Pages: [1]   Go Down

GA-Z97-HD3: RAID failed after update from F4 to F5

bartje885

  • 1
  • 0
GA-Z97-HD3: RAID failed after update from F4 to F5
« on: December 03, 2014, 11:20:40 am »
Hello guys,

I did a bios update from F4 to F5 and after the flash I noticed that my raid array was gone. I went to the bios settings and noticed that the settings were factory reset. I did configured the sata configuration back to raid but this resulted in a Failed Raid Array (the screen to choose for Control+I)

Can somebody help me please?
« Last Edit: December 03, 2014, 11:27:53 am by bartje885 »
Logged

autotech

  • 1553
  • 35
Re: GA-Z97-HD3: RAID failed after update from F4 to F5
« Reply #1 on: December 03, 2014, 11:32:38 am »
go back to where you build raid and make sure it is healthy. Use windows disk to do a start up repair, if none of that work you might have to rebuild it.
Logged
GA-Z170X-UD5,Core i5-6600K,16 GIG,3200 ram ,2 X Corsair 240GB SATA III SSD, 500 gig HD,7 ult 64\, Rx-480 8gig\

Z97X-SOC GIGABYTE, I5 4670k, 16 gig 1600 ram, 240 gig sata3 SSD,1x 500HD/ R9 280x, corsair 650 RM PSU

GA-Z97X-Gaming G1,850 corsair,,DDR4 3200,240SSd,6950 video,850EVA
Pages: [1]   Go Up
« previous next »
  1. Official GIGABYTE Forum
  2. Questions about GIGABYTE products
  3. Motherboards with Intel processors
  4. GA-Z97-HD3: RAID failed after update from F4 to F5