GA-H77-D3H USB 3 not working with USB 3 devices

[Deses]

Hello,

I have a GA-H77-D3H rev 1.1 motherboard with the firmware F15 and recently I got my first USB3 device and I couldn't make it work on the USB3 Ports.

This is the device: Sharkoon 5-BAY RAID Box

I have the Eltron and Intel drivers and the chipstet drivers installed, and I think the BIOS is correctly configured. I even updated it to the latest stable version.

Summary
      Operating System
         Windows 7 Ultimate 64-bit SP1
      CPU
         Intel Core i7 3770 @ 3.40GHz   28 °C
         Ivy Bridge 22nm Technology
      RAM
         8,00GB Dual-Channel DDR3 @ 798MHz (9-9-9-24)
      Motherboard
         Gigabyte Technology Co., Ltd. H77-D3H (Intel Core i7-3770 CPU @ 3.40GHz)   28 °C
      Graphics
         SMT24A350 (1920x1080@60Hz)
         916W (1440x900@60Hz)
         1023MB NVIDIA GeForce GTX 650 Ti (ASUStek Computer Inc)   27 °C
      Storage
         232GB Samsung SSD 840 EVO 250GB ATA Device (SSD)   26 °C
         1863GB Western Digital WDC WD20EARX-00MMMB0 ATA Device (SATA)   30 °C
      Optical Drives
         ASUS DRW-24B5ST ATA Device
      Audio
         NVIDIA High Definition Audio

And here you have photos of the bios config in case you see something wrong.

Thank you for your help.

[autotech]

Did you olug it in after windows has loaded and does it do the same thing?

[Deses]

Yes, I've tried plugging the cable before and after Windows startup and it does nothing. Sometimes, depending on the USB 3 that I use, Windows make a sound like it detected the device, but nothing shows up. In Drive Management the disk drives doesn't show up, so it's not a problem where the drives don't have a letter assigned.

I'd like to add that USB 2.1 devices work fine on the USB 3 ports and that the Raid Box also works fine plugged on USB 2.1 port. So looks like it's a USB 3 on USB 3 problem.

Thanks for the help!

[autotech]

It could be that the eltron drivers are not right. There has been a lot of post  about eltron drivers causing problems.  I would say your USB3 drivers ( Eltron ) are not mature yet. To many post about eltron drivers like I said or it could be they don't support your Raid box.