GA-X99-UD4 (rev. 1.0) - M2 Wifi Card

[ward]

Hi,

I currently have the following Motherboard:

Gigabyte: GA-X99-UD4 (rev. 1.0)

I would like to put a M2 Wifi Card in there - however there are different types. I am trying to determine what specs it uses exactly.

Can you give me the exact specification I need to make sure it fits the slot and I can screw it in properly?

Would the following card fit ?

http://www.scorptec.com.au/product/Networking_-_Wireless/PCI_Express_Cards/60514-7265.NGWWB.W

Thanks,

Ward.

[global]

Hi,

I currently have the following Motherboard:

Gigabyte: GA-X99-UD4 (rev. 1.0)

I would like to put a M2 Wifi Card in there - however there are different types. I am trying to determine what specs it uses exactly.

Can you give me the exact specification I need to make sure it fits the slot and I can screw it in properly?

Would the following card fit ?

http://www.scorptec.com.au/product/Networking_-_Wireless/PCI_Express_Cards/60514-7265.NGWWB.W

Thanks,

Ward.

I think that is the correct one.
This one definateley is.

http://www.scan.co.uk/products/intel-m2-wi-fi-card-80211ac-(300plus867)-dual-band-2x2-wi-fi-plus-bluetooth-40

or http://www.amazon.com/Authentic-7265NGW-Wireless-AC-802-11ac-Bluetooth/dp/B00STV5UKW

http://www.ebay.com/itm/U-FL-IPEX-IPX-I-PEX-MHF4-to-SMA-female-pin-0-81mm-cable-for-Router-Antenna-WiFi-/171651868955

I think these are the correct Pigtails but they hav'nt arrived yet.Make sure you get them long enough.

[dmdilks]

By what the book says Page 30 it will take any M2-WIFI (M.2 Socket 1 Connector) You can insert an M.2 Wi-Fi module into this connector. So as long it is a M2 Type card you should be fine.