Official GIGABYTE Forum
  1. Official GIGABYTE Forum
  2. Questions about GIGABYTE products
  3. Motherboards with Intel processors
  4. X99 SLI
« previous next »
Pages: [1]   Go Down

X99 SLI

Gabbatek

  • 3
  • 0
X99 SLI
« on: November 18, 2015, 01:57:45 pm »
Help me

I can no activate xmp or overclock on my x99 sli board without it crashing and loading the optimised defaults. I even sent my ram back and made sure i got some that is listed as supported and i still can't overclock without failure.

Even if i leave the cpu at stock and just turn xmp on, fail.

Using the latest beta bios, i have tried flashing.


I was hesitant about getting another gigabyte board as had issues with sandybridge, but the price was cheaper.

help me
Logged

dmdilks

  • 3090
  • 43
  • "If it isn't broke don't fix it"
    • http://dmdcomputerservice.webs.com/
Re: X99 SLI
« Reply #1 on: November 18, 2015, 02:36:22 pm »
Quote from: Gabbatek on November 18, 2015, 01:57:45 pm
Help me
I can no activate xmp or overclock on my x99 sli board without it crashing and loading the optimised defaults. I even sent my ram back and made sure i got some that is listed as supported and i still can't overclock without failure.
Even if i leave the cpu at stock and just turn xmp on, fail.
Using the latest beta bios, i have tried flashing.
I was hesitant about getting another gigabyte board as had issues with sandybridge, but the price was cheaper.
help me

Sorry this isn't telling us nothing. Yes you are having a problem, but what memory are you trying to run? If you are running any thing higher then 2133 you have set manual.   
Logged
X299X Aorus Master, i9-9940x-3.30Ghz, 64gb G-Skill DDR4-2400, MSI RTX-3070 8GB, Cooler Master case, Thermal-take PSU 850w, 1-M2-NMVe SSD-512gb, 3-Pny 1TB SSD, 2-WD Raptors 1TB, Win 10 pro 64bit, Asus 35" 144Mhz Monitor.

Gabbatek

  • 3
  • 0
Re: X99 SLI
« Reply #2 on: November 18, 2015, 05:28:20 pm »
Quote from: dmdilks on November 18, 2015, 02:36:22 pm
Quote from: Gabbatek on November 18, 2015, 01:57:45 pm
Help me
I can no activate xmp or overclock on my x99 sli board without it crashing and loading the optimised defaults. I even sent my ram back and made sure i got some that is listed as supported and i still can't overclock without failure.
Even if i leave the cpu at stock and just turn xmp on, fail.
Using the latest beta bios, i have tried flashing.
I was hesitant about getting another gigabyte board as had issues with sandybridge, but the price was cheaper.
help me

Sorry this isn't telling us nothing. Yes you are having a problem, but what memory are you trying to run? If you are running any thing higher then 2133 you have set manual.

CMK16GX4M4A2400C14

with a 5820k windows 10

i have tried two different speeds of ram, sent the first set back. also tried one stick at a time, trying to get the xmp to work on them and i have memory tested.

what could be causing instability?
Logged

dmdilks

  • 3090
  • 43
  • "If it isn't broke don't fix it"
    • http://dmdcomputerservice.webs.com/
Re: X99 SLI
« Reply #3 on: November 19, 2015, 02:51:18 am »
I could be wrong because thing change so much. But you really can't use the XMP with faster than 2133. You will have manual set the speed and timings. I was going to check my bios because I do have some 2400 memory.

But I have started to get the black screen when trying to get into the bios. It has something to do with the sata hard drives connect.
Logged
X299X Aorus Master, i9-9940x-3.30Ghz, 64gb G-Skill DDR4-2400, MSI RTX-3070 8GB, Cooler Master case, Thermal-take PSU 850w, 1-M2-NMVe SSD-512gb, 3-Pny 1TB SSD, 2-WD Raptors 1TB, Win 10 pro 64bit, Asus 35" 144Mhz Monitor.
Pages: [1]   Go Up
« previous next »
  1. Official GIGABYTE Forum
  2. Questions about GIGABYTE products
  3. Motherboards with Intel processors
  4. X99 SLI