Official GIGABYTE Forum

Kingston DDR3 2400 MHz works at 1600 MHz

Krx

  • 2
  • 0
Kingston DDR3 2400 MHz works at 1600 MHz
« on: November 29, 2015, 10:05:41 am »
Hello

I had this configuration:

INTEL Core i7-4770K 3.50GHz,
Gigabyte GA-Z87M-D3H (latest bios)
http://www.gigabyte.com/products/product-page.aspx?pid=4486#sp
Kingston DDR3 1600MHz 8GB (2x4) HX Beast KHX16C9T3K2/8X
Intel SSD 530 Series 180GB
Win 8.1 pro 64

I needed more ram so I purchased this one:
Kingston DDR3 HyperX Savage, 2400MHz, 16GB (2x8G),  C11, HX324C11SRK2/16

Previous RAM is taken out. New ram is installed in slots 1 and 3.
PC is OC-ed with Gigabyte Easy Tune @ 4.1 GHz
I wonder , why in BIOS says that ram works at 1600 MHz?
CpuZ PrintScreen attached.

In bios ram freq is set on Auto (1600). If I set profile1 (2400), it won't boot into OS, it returns into bios with warning message that something is not right.

Any suggestion(s)?

Tnx,
Regards

dmdilks

  • 3093
  • 43
  • "If it isn't broke don't fix it"
    • http://dmdcomputerservice.webs.com/
Re: Kingston DDR3 2400 MHz works at 1600 MHz
« Reply #1 on: November 30, 2015, 01:28:41 am »
Try setting the speed and timings manually. The CPU will only support 1600. If that doesn't work. Try OC the CPU a little to see if you get them to run at that speed.
X299X Aorus Master, i9-9940x-3.30Ghz, 64gb G-Skill DDR4-2400, MSI RTX-3070 8GB, Cooler Master case, Thermal-take PSU 850w, 1-M2-NMVe SSD-512gb, 3-Pny 1TB SSD, 2-WD Raptors 1TB, Win 10 pro 64bit, Asus 35" 144Mhz Monitor.