Official GIGABYTE Forum

F21a feedback - messed up overclocks

F21a feedback - messed up overclocks
« on: January 31, 2016, 09:51:06 pm »
Hello - I made the mistake today of moving to the F21a from F2f bios on my Gaming 5p. Until now, I've been overclocking at 4.25 and 4.37 very well at fairly low vcore - around 1.2. Now, with the same settings as before, I can't seem to get stability unless I bump up vcore long with a few others up a bit. Anyone else having similar issues?


i7-5930K // Gigabyte X99-Gaming 5P (rev 1.0, BIOS F21a) // 16GB G.SKILL F4-3000C15Q (15-15-15-35) // EVGA GTX 980ti Hybrid // Corsair H110i GT // Coolermaster HAF 932 Case // Corsair RM1000i // Acer XB270JU

dmdilks

  • 3084
  • 43
  • "If it isn't broke don't fix it"
    • http://dmdcomputerservice.webs.com/
Re: F21a feedback - messed up overclocks
« Reply #1 on: February 01, 2016, 02:32:19 am »
That is right the first mistake was updating some thing that you didn't need too. The best thing to do is ask the people over on the OC part of the forum. You could go back to a older bios but you have to do it with boot-able USB drive. Put the bios on there and boot from it. You can't do it in the bios now. I think tells you that you can't go back.
X299X Aorus Master, i9-9940x-3.30Ghz, 64gb G-Skill DDR4-2400, MSI RTX-3070 8GB, Cooler Master case, Thermal-take PSU 850w, 1-M2-NMVe SSD-512gb, 3-Pny 1TB SSD, 2-WD Raptors 1TB, Win 10 pro 64bit, Asus 35" 144Mhz Monitor.

Re: F21a feedback - messed up overclocks
« Reply #2 on: February 01, 2016, 02:34:25 am »
Thanks. Tried booting from a USB to flash it like normal but no go. It's protected.

Re: F21a feedback - messed up overclocks
« Reply #3 on: February 01, 2016, 12:32:05 pm »
Apparently my board has DualBios, but there's no instructions on how to activate the backup. Anyone know how? When the backup is activated, does it replace the primary bios?

dmdilks

  • 3084
  • 43
  • "If it isn't broke don't fix it"
    • http://dmdcomputerservice.webs.com/
Re: F21a feedback - messed up overclocks
« Reply #4 on: February 01, 2016, 02:43:29 pm »
The thing is you can try this not saying it will work. But when you updated the bios by any chance did it do the backup too?

http://www.overclockers.com/forums/showthread.php/697533-GUIDE-Forcing-backup-BIOS-on-Gigabyte-motherboards

Here is a link on updating it back to the older bios.

http://forum.giga-byte.co.uk/index.php?topic=2441.msg89013#msg89013
X299X Aorus Master, i9-9940x-3.30Ghz, 64gb G-Skill DDR4-2400, MSI RTX-3070 8GB, Cooler Master case, Thermal-take PSU 850w, 1-M2-NMVe SSD-512gb, 3-Pny 1TB SSD, 2-WD Raptors 1TB, Win 10 pro 64bit, Asus 35" 144Mhz Monitor.

Re: F21a feedback - messed up overclocks
« Reply #5 on: February 01, 2016, 03:16:29 pm »
The thing is you can try this not saying it will work. But when you updated the bios by any chance did it do the backup too?

http://www.overclockers.com/forums/showthread.php/697533-GUIDE-Forcing-backup-BIOS-on-Gigabyte-motherboards

Here is a link on updating it back to the older bios.

http://forum.giga-byte.co.uk/index.php?topic=2441.msg89013#msg89013

Thanks for linking those. I'll give them a try later for sure, although I have a feeling the Rufus/bootable USB still won't work. Regarding if the backup was also flashed with the new Bios, I really hope not as that would defeat the purpose of a backup I think?

Re: F21a feedback - messed up overclocks
« Reply #6 on: February 01, 2016, 08:39:20 pm »
Called Gigabyte support and spoke to someone, which was nice. However, he suggested I should send the board in and have them re-flash it. Not gonna happen.  ;) He also mentioned that using Qflash Plus should work, which seems to be a last resort. There's a special white USB slot in the back that takes a FAT 32 stick with the bios on it, does the work for you, and can be done without a CPU or memory installed.

I found some instructions here: http://gigabytedaily.blogspot.com/2014/09/gigabyte-x99-new-function-qflash-plus.html

Seem straight forward, but the video says to take out the memory but the written does not. The Gigabyte rep said to unplug the CPU power from the mobo - didn't mention memory. So, three different ways to do it I guess - will just have to pick one.
« Last Edit: February 01, 2016, 08:40:25 pm by treadpool »

Re: F21a feedback - messed up overclocks
« Reply #7 on: February 02, 2016, 01:20:38 am »
Nothing worked. Surprised the efiflash tool on a bootable usb in freedos mode even stopped the flash - telling me to get a newer bios version.