Official GIGABYTE Forum

Looking for an I/O shield

Looking for an I/O shield
« on: February 02, 2016, 04:56:25 pm »
I have had to buy a new motherboard for my system recently and due to my processor been an 1155 socket it has been hard, i eventually found a mini-ITX which i need for my system but it came without the I/O shield and i am looking for one that will fit. Can anyone point me in the right direction.

I believe the 12AIO-000023-01 will fit my board GA-H61N-D2V but i cant seem to find a way to buy it from the gigabyte site.

dmdilks

  • 3093
  • 43
  • "If it isn't broke don't fix it"
    • http://dmdcomputerservice.webs.com/
Re: Looking for an I/O shield
« Reply #1 on: February 02, 2016, 05:13:39 pm »
Try eBay or Amazon that is where I got my last from I needed.
X299X Aorus Master, i9-9940x-3.30Ghz, 64gb G-Skill DDR4-2400, MSI RTX-3070 8GB, Cooler Master case, Thermal-take PSU 850w, 1-M2-NMVe SSD-512gb, 3-Pny 1TB SSD, 2-WD Raptors 1TB, Win 10 pro 64bit, Asus 35" 144Mhz Monitor.

Re: Looking for an I/O shield
« Reply #2 on: February 02, 2016, 05:21:48 pm »
i have looked on ebay i cant seem to find one that im confident will fit, im not sure now after looking the one i thought that would fit, will as it it does not appear to be able to acomodate the size of the dvi port.

shadowsports

  • 2259
  • 67
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: Looking for an I/O shield
« Reply #3 on: February 03, 2016, 09:32:46 pm »
Have you tried contacting Gigabyte Support directly?

http://www.gigabyte.com/support-downloads/technical-support.aspx
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W11
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W11
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW

Re: Looking for an I/O shield
« Reply #4 on: February 04, 2016, 02:39:56 am »
Have you tried contacting Gigabyte Support directly?

http://www.gigabyte.com/support-downloads/technical-support.aspx

i did actually thinking it was a very very long shot but they have said they will send me one providing i send them a pre-paid envelope which i think is a fair deal. i am over the moon given it is not a discontinued board.

shadowsports

  • 2259
  • 67
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: Looking for an I/O shield
« Reply #5 on: February 04, 2016, 04:25:13 pm »
Cool.  Solved.   :)
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W11
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W11
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW