Official GIGABYTE Forum

BIOS settings aren't being saved

Nike

  • 4
  • 0
BIOS settings aren't being saved
« on: April 16, 2010, 02:26:03 pm »
My friend is having an issue with the G31M-S2L board.
The FSB frequency is being switched back to Auto nearly every times he reboots the system.

I have had this problem before and I've seen other boards acting the same, all made by Gigabyte.
I wonder if there's a known solution for this problem.

When I had this problem (P35-DS3L), resetting the BIOS via the jumper (CLR_CMOS) did the trick, but it's not helping my friend with the G31M-S2L.
I should also mention that he even updated his bios to the latest version, yet it didn't help either.

Thanks in advance.
Daniel.

absic

  • *
  • 5815
  • 529
  • Never give up; Never surrender!
    • Bandcamp
Re: BIOS settings aren't being saved
« Reply #1 on: April 16, 2010, 04:23:12 pm »
Hi,

Have you tried a new mobo battery?

It's the first place I would look if re-setting BIOS didn't work properly.
Remember, when all else fails a cup of tea and a good swear will often help! It won't solve the problem but it will make you feel better.

Nike

  • 4
  • 0
Re: BIOS settings aren't being saved
« Reply #2 on: April 16, 2010, 04:34:24 pm »
But not all the settings in the BIOS are being reset. Its only the FSB, it turns to Disabled most times.

absic

  • *
  • 5815
  • 529
  • Never give up; Never surrender!
    • Bandcamp
Re: BIOS settings aren't being saved
« Reply #3 on: April 16, 2010, 04:39:15 pm »
Could still be due to the battery and by replacing it you eliminate a possible cause.

If the problem still persists then you know there is an issue elsewhere.
Remember, when all else fails a cup of tea and a good swear will often help! It won't solve the problem but it will make you feel better.