Official GIGABYTE Forum
  1. Official GIGABYTE Forum
  2. Questions about GIGABYTE products
  3. Motherboards with Intel processors
  4. GA-H55M-UD2H Don't turn on >> loop start
« previous next »
Pages: [1]   Go Down

GA-H55M-UD2H Don't turn on >> loop start

spippolone

  • 2
  • 0
GA-H55M-UD2H Don't turn on >> loop start
« on: April 29, 2016, 09:30:33 pm »
Hi, I have a problem with an GA-H55M-UD2H Motherboard. It's don't start, when I press power button, turn on 4 leds, start cpu blower, start power supply blower and turn off again. It's a loop process.
I tryed to change power supply, remove all from mainboard, disconnect power button, but the problem it's the same.
What can I do ?

https://youtu.be/-xW5K2lqfcs
« Last Edit: April 29, 2016, 11:45:23 pm by spippolone »
Logged

shadowsports

  • 2259
  • 67
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: GA-H55M-UD2H Don't turn on >> loop start
« Reply #1 on: May 02, 2016, 12:51:14 pm »
Greetings,
We have zero history about this system (v1 or v1.3).  Did it ever work previously?  Have you changed anything, upgraded a component? Flashed BIOS?  H55 was released Q1 of 2010.

Thanks for letting us know you tried with a different PSU.  I suspect you get no POST beep(s)?  Have you tried to CLR_CMOS?  Jumper is next to SATA ports.  Turn off, disconnect power, place jumper over PINs.  I'd pull the battery as well.

If 2 sticks of RAM, install into blue slots DDR3_1 & DDR3_3.  If using USB mouse and keyboard, please connect to ports next to PS/2.  Please include your complete system specs.  No need to go further until you've replied with more info. 
« Last Edit: May 02, 2016, 12:53:56 pm by shadowsports »
Logged
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W11
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W11
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW

spippolone

  • 2
  • 0
Re: GA-H55M-UD2H Don't turn on >> loop start
« Reply #2 on: May 06, 2016, 11:42:05 pm »
Quote from: shadowsports on May 02, 2016, 12:51:14 pm
Greetings,
We have zero history about this system (v1 or v1.3).  Did it ever work previously?  Have you changed anything, upgraded a component? Flashed BIOS?  H55 was released Q1 of 2010.

Thanks for letting us know you tried with a different PSU.  I suspect you get no POST beep(s)?  Have you tried to CLR_CMOS?  Jumper is next to SATA ports.  Turn off, disconnect power, place jumper over PINs.  I'd pull the battery as well.

If 2 sticks of RAM, install into blue slots DDR3_1 & DDR3_3.  If using USB mouse and keyboard, please connect to ports next to PS/2.  Please include your complete system specs.  No need to go further until you've replied with more info.

Sure no beep, I wrote, tryed to turn on without ram, without HDD, after clear cmos. Sure it's broken, I'll go to repair it.
Logged

dmdilks

  • 3093
  • 43
  • "If it isn't broke don't fix it"
    • http://dmdcomputerservice.webs.com/
Re: GA-H55M-UD2H Don't turn on >> loop start
« Reply #3 on: May 07, 2016, 02:29:44 am »
You need memory for it to run and even a video card maybe. What is the CPU and do you have memory what speed? Plus this is the board you have too GA-H55M-D2H not the one you have listed.
« Last Edit: May 07, 2016, 02:35:11 am by dmdilks »
Logged
X299X Aorus Master, i9-9940x-3.30Ghz, 64gb G-Skill DDR4-2400, MSI RTX-3070 8GB, Cooler Master case, Thermal-take PSU 850w, 1-M2-NMVe SSD-512gb, 3-Pny 1TB SSD, 2-WD Raptors 1TB, Win 10 pro 64bit, Asus 35" 144Mhz Monitor.

motorpsycho

  • 2
  • 0
Re: GA-H55M-UD2H Don't turn on >> loop start
« Reply #4 on: May 13, 2016, 07:27:36 am »
It's a dead processor... can you find another cpu to try ?
Logged
Pages: [1]   Go Up
« previous next »
  1. Official GIGABYTE Forum
  2. Questions about GIGABYTE products
  3. Motherboards with Intel processors
  4. GA-H55M-UD2H Don't turn on >> loop start