GA-P67A-UD3 "The system has experienced boot failures because of overclocking.."

[Dragonforcer]

Hi. Have a same problem like here - http://forum.giga-byte.co.uk/index.php?topic=4117.0
RAM 2x8gb Kingston HyperX Savage 2133 ( 11-12-12-30 ) with GA-P67A-UD3. It works fine at 1600, but when i tried activate XMP profile for 2133 after a few restarts the sytem restarted it'self half way through POST and I got this message:

"The system has experienced boot failures because of overclocking or changes in voltage. Latest settings in BIOS may not coincide with current H/W states"

Bios F6

[dmdilks]

What CPU you running? Most of the CPU's then only support 1066 & 1333 memory. Yes it says that it can run the 2133 but you have to OC to get it to run at 2133. If you put in 1066, 1333 it will really run faster then the 2133. But I'm done going there sorry.

I know what it says that it will run DDR3 2133/1866/1600/1333/1066 MHz memory modules. But what really should say is Support for DDR3 2133(oc) /1866(oc) /1600(oc) /1333/1066 MHz memory modules. To get it to work you need to OC your CPU.