Official GIGABYTE Forum

Gigabyte GA-990FX-Gaming - ventilator speed problems

win32

  • 1
  • 0
Gigabyte GA-990FX-Gaming - ventilator speed problems
« on: July 14, 2016, 06:42:07 pm »
I just buy my first Gigabyte MBO and for first time I see strange settings for ventliator speed?

My Noctua NH-D15 is pluged in CPU header without Noctua silencer but I don't know how to set my Noctua speed at max?

Maximum speed of Noctua is 1500 RMP (+/- 10%) but my speed is right now 960 RPM.

All power settings in BIOS /UEFI is disabled.

Ventilator settings in "PC Health Status":

CPU Fan Controle Mode: PWM (Noctua OFC have 4 pin)
CPU Fan Speed Control: Disabled ("Allows the fan to run at full speeds")

With that settings my speed is around 960 RPM!

Now, one 120 mm fan with 3-pin settings is connected to "SYS_FAN1 Connector".

1st System Fan Speed Control (SYS_FAN1 Connector): Disabled (" Allows the fan to run at full speeds")

With that settings I get 991 RPM and that's ok because max fan speed is 1000RPM.

I don't want to install some 3rd party software for my fan speed, I just want to set max speed in BIOS /UEFI and please can I get answer how to get max speed on CPU header for my Noctua NH-D15 (1500RPM, not 960RPM).

OK, 1200-1300 RPM will be OK but 960RPM is not so great.

All MBO's I have is have normal speed settings but this Gigabyte is not so great and I don't want to install some software just because bad BIOS settings.

Thanks!

Edit:

After few restarts, with this settings my CPU fans is work on full speed:

CPU Fan Controle Mode: PWM 
CPU Fan Speed Control: Disabled 

Ok, this thing is fixed but how to get cca 1200 RPM when default speed is 1500 RPM (fan is PWM and this setting is for CPU)?

What slope to use or how to get 1200-1300 RPM?

MBO is great but fan setup is not so great, maybe we can get some BIOS/UEFI fix for fan controller?

Many peoples have same problems with fan controller on Gigabyte MBOs and is sad that many of them is buying Asus, MSI etc....just because they have better fan settings.
Even ASRock trash (NHF for owners) have normal setup for fans.

My MBO have great 8+2 phase power, great CPU and other settings but please tell me how to get that 1200-1300 RPM on CPU (without using any 3rd party app and that maean without EasyTune, Speed fan etc.)