Official GIGABYTE Forum
  1. Official GIGABYTE Forum
  2. Questions about GIGABYTE products
  3. Motherboards with Intel processors
  4. ACPI Wakeup ga-h110m-s2h (Linux)
« previous next »
Pages: [1]   Go Down

ACPI Wakeup ga-h110m-s2h (Linux)

meindert66

  • 3
  • 0
ACPI Wakeup ga-h110m-s2h (Linux)
« on: September 09, 2016, 05:14:09 pm »
It seems to be impossible to get wakeup by alarm (rtc) working. With my old motherboard of 6 years old I did not have any problem with it, but the Gigabyte ga-h110m-s2h seems to be to complicated. According to Gigabyte it should work with the latest firmware. I tried the instructions on the following site: https://www.mythtv.org/wiki/ACPI_Wakeup

Please help!
Logged

meindert66

  • 3
  • 0
Re: ACPI Wakeup ga-h110m-s2h (Linux)
« Reply #1 on: September 10, 2016, 10:08:36 pm »
I realized that I'm not completely correct about the issue. It points out that the motherboard is capable of wakeup by alarm, because when I enter specific time in the BIOS the computer is started at that time.

The issue is that the bios does not accept an alarm time from the operating system! Gigabyte stated that the wakeup by alarm function is working, but is this tested with an alarm time initiated from the operating system?
Logged

shadowsports

  • 2259
  • 67
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: ACPI Wakeup ga-h110m-s2h (Linux)
« Reply #2 on: September 11, 2016, 04:55:43 am »
Quote from: meindert66 on September 10, 2016, 10:08:36 pm
Gigabyte stated that the wakeup by alarm function is working, but is this tested with an alarm time initiated from the operating system?

No, this statement is operating system agnostic.  They are referring to wake on alarm/event set in the BIOS.  They don't test it from the OS.  No MB manufacturer tests it this way that I'm aware of.   

Also note, Linux is not officially supported.  While it can be installed and does run, drivers etc, have to be downloaded and installed from the chipset vendor directly.  Obviously some distros may work better/differently than others.  I know this is a basic function and simple commands (lines of code).  A different BIOS might help, but there is no guarantee of this.     
« Last Edit: September 11, 2016, 04:56:32 am by shadowsports »
Logged
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W11
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W11
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW

meindert66

  • 3
  • 0
Re: ACPI Wakeup ga-h110m-s2h (Linux)
« Reply #3 on: September 12, 2016, 05:58:05 am »
Quote from: shadowsports on September 11, 2016, 04:55:43 am
No, this statement is operating system agnostic.  They are referring to wake on alarm/event set in the BIOS.  They don't test it from the OS.  No MB manufacturer tests it this way that I'm aware of.

Odd that the board is not tested fully, now I regret the choice for this particular board. Multimedia systems in combination with Linux (TVHeadend / Kodi) are shown more often I think.
Logged

shadowsports

  • 2259
  • 67
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: ACPI Wakeup ga-h110m-s2h (Linux)
« Reply #4 on: September 12, 2016, 09:33:35 pm »
A colleague just sideloaded kodi on his Fire TV...  said its pretty cool.
Logged
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W11
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W11
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW
Pages: [1]   Go Up
« previous next »
  1. Official GIGABYTE Forum
  2. Questions about GIGABYTE products
  3. Motherboards with Intel processors
  4. ACPI Wakeup ga-h110m-s2h (Linux)