Official GIGABYTE Forum

Boot Loop on Z77-DS3H (can fix with BIOS restore, but BIOS keeps "corrupting")

muffie

  • 3
  • 0
I've been happily using a 3770 on a very nice Z77-DS3H for three years. Bought it circa 2003 and the machine was amazing.

Decided to upgrade and gave this setup to my kid. Started to mount it on Corsair Spec Alpha + Corsair SSD + 16gb Corsair DDR3 (2x8gb).

Machine was working fine, but then, all of a sudden, the -already described here- symptom of  constant reboot (2 quick restarts: fan on, psu spins, fan off + one boot with Gigabyte SPLASH screen + a blank screen with "Gigabyte DUAL UEFI Bios" header shows up, 5 seconds and the whole loop restarts).

Already unplugged everything, leaving just the Motherboard, single DDR chip + just the heatsink! (yes, it's a thermaltake FRIO OCK, can handle fine for quick testing).

The only way to remove it from the loop, is to start trying to press several keys (DEL + ALT + F10 + F11 + F12) randomly just before the 5 second splash screen. When I get to that point, it says: BIOS Corrupted! Restoring previous one...

Well, the point is: What might be causing the BIOS corruption? When I changed the MOBO from cases, I used Coollaboratory Liquid. I'm very careful, but, maybe I dropped some around the processor area? I ended up disassembling everything, cleaned with Isopropilic Alcohol and replaced with Gelid Extreme (non conductive).

Another "issue" I had when assembling was that, Thermaltake FRIO fans were acting weird. I touched the CASE's FAN controller and the voltage chip was burning like hell. In the end one of the fans stopped working and I decided again to triple check all FAN connections: nothing. Decided to throw away the original FANs and adapted a Corsair SP120L PWM to the heatsink: perfect, no heat on the fan controller and so on...

So, any ideas? I'm able to basically use a multimeter. Maybe I can check some of the MB components for some failure? Maybe there's still a short somewhere between the case and the MOBO (im using the screws on the case just like I always do, but, who knows)?

All the best,

shadowsports

  • 2258
  • 67
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
I've been happily using a 3770 on a very nice Z77-DS3H for three years. Bought it circa 2003 and the machine was amazing.

We know you meant 2013..  z77 was released in 2012 :)

Barring a unknown hardware failure...  and that the board hasn't been physically damaged in some way.

Is all of the hardware...  CPU, memory on the BIOS support list and QVL for the board?
Are you using any type of splitters or fan controllers?
Have you tested with another PSU?
Have you updated the BIOS?
Does this board have a BIOS switch (button) on the rear panel?
Sounds like you are pretty confident nothing is shorting, or grounding to the case?
Have you considered testing with the board out of the case?

Other considerations:
Perform a battery pull
Can you copy the backup BIOS to the primary BIOS chip?  I think its ALT+F10 or ALT+F12 depending on type (Award or AMI) 

« Last Edit: October 29, 2016, 05:20:25 pm by shadowsports »
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W11
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W11
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW