I have been running my system for a month and everything seems stable.Idle temps range from 29 to 32 celsius.Load ranges from 42 to 49 celsius.I know this chip has C3 stepping,and can run at 1.3 volts.I started to mess around with amd overdrive,and noticed all my cores are running at 1.4 volts.I want to overclock from 3.2 to 3.6GHz.Nothing major,but I wonder about voltage.Should I lower my voltage in the bios.I have it set on auto,but that seems high.I heard that you can adjust the multiplier without changing voltage settings for these chips.I have alot to learn,so I have been reading some oc-ing guides.Raising the multiplier sounds alot less of a hassle in my case,with a smaller oc.Does that sound correct?
Antec 900-Modded
AMD Phenom II X4 955 Black Edition Deneb 3.2GHz Socket AM3 125W Quad-Core Processor Model HDZ955FBGMBOX - Retail
G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Dual Channel Kit Desktop Memory Model F3-12800CL9D-4GBNQ - Retail
GIGABYTE GA-MA790GPT-UD3H AM3 AMD 790GX HDMI ATX AMD Motherboard - Retail
COOLER MASTER Hyper 212 Plus Intel Core i5 & Intel Core i7 compatible RR-B10-212P-G1 120mm
CORSAIR CMPSU-650TX 650W ATX12V / EPS12V SLI Ready CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 .
EVGA 01G-P3-1158-TR GeForce GTS 250 1GB 256-bit DDR3 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card - Retail
LITE-ON 24X DVD Writer Black SATA Model iHAS424-98 LightScribe Support - Retail
Rosewill RC-401-EX 10/ 100/ 1000Mbps PCI-Express Gigabit Low Profile Network Card - Retail
Western Digital Caviar Black WD7501AALS 750GB 7200 RPM SATA 3.0Gb/s 3.5" Hard Drive -Bare Drive X 2
Western Digital Caviar Blue 320GB 7200 RPM SATA 3.0Gb/s 3.5" Hard Drive
