« on: May 19, 2010, 04:34:42 am »
Hope i didnt double post. I am using 4 gigs of the above ram and just ordered another 4 gigs so i hope to run all 8 gigs at 1600. What settings in bios do i need to change when i install them. Below is my full setup.
Silverstone Strider 1000watt
AMD Phenom 2 1090T when bios arrives
2x2gb g skill 1600 mghtz
Seagate 500 gig perpendicular sata hd x 2 Raid 0
windows 7 ultimate 64 bit limited edition
2 x 4870 1 gig
Audigy 2 ZS plat. sound card
5.1 creative 550watt speakers
1 x lite on super multi drive
1 x sony dvd-rw lightscribe
1 x asus sata dvd writer
3.5 floppy
52 in one memory card reader
230mm side,230 top,230 front,140 rear fans
Zalman 9700 cpu cooler
CM haf 932 case
Of course the above motherboard. Thank you for any help.
Logged
GA-Z170X-UD5,Core i5-6600K,16 GIG,3200 ram ,2 X Corsair 240GB SATA III SSD, 500 gig HD,7 ult 64\, Rx-480 8gig\
Z97X-SOC GIGABYTE, I5 4670k, 16 gig 1600 ram, 240 gig sata3 SSD,1x 500HD/ R9 280x, corsair 650 RM PSU
GA-Z97X-Gaming G1,850 corsair,,DDR4 3200,240SSd,6950 video,850EVA
