Official GIGABYTE Forum

RAM not running at correct speed

RAM not running at correct speed
« on: June 20, 2010, 05:37:53 pm »
I got the GA-X58A-UD5 (rev. 1.0) motherboard and I got 6GB of OCZ 1600MHz DDR3 RAM (product code: OCZ3G1600LV6GK) but it only runs at 1066Mhz instead of 1600Mhz.
If I try to increase that the system fails to boot. Whats going on?

I got the latest BIOS for the motherboard and everything...

Badbonji

  • 356
  • 13
Re: RAM not running at correct speed
« Reply #1 on: June 20, 2010, 05:46:33 pm »
Have you tried manually entering the timings as well? Might not be recognised correctly :/

The RAM voltage may need to be adjusted also, might need to be at 1.65V or so (1.65V is still safe so you can try it anyway to see if this works). This is just touching the multiplier and not the base clock right?
Core i7 965 @ 4.35Ghz 1.37Vcore
6Gb G.Skill 1600Mhz DDR3 @ 1740Mhz 8-8-8-20 1T
HIS HD5970 @ 800/1100
Gigabyte Extreme X58
X-Fi Xtreme Gamer Fatal1ty
256GB M4 + 150GB Raptor
EK Supreme HF/GTX480/MCP655/EK Res :D

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: RAM not running at correct speed
« Reply #2 on: June 20, 2010, 06:34:21 pm »
I got the GA-X58A-UD5 (rev. 1.0) motherboard and I got 6GB of OCZ 1600MHz DDR3 RAM (product code: OCZ3G1600LV6GK) but it only runs at 1066Mhz instead of 1600Mhz.
If I try to increase that the system fails to boot. Whats going on?

I got the latest BIOS for the motherboard and everything...

If it has an XMP set it in the BIOS to that if not use the manual settings and up the voltage to the recommended which if memory serves me is 1.65v. If you still have no joy try running Memtest86 on the modules one at a time.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: RAM not running at correct speed
« Reply #3 on: June 20, 2010, 06:44:28 pm »
Have you tried manually entering the timings as well? Might not be recognised correctly :/

The RAM voltage may need to be adjusted also, might need to be at 1.65V or so (1.65V is still safe so you can try it anyway to see if this works). This is just touching the multiplier and not the base clock right?
I will try changing the voltage, but I've done that before when changing the multiplier and had no success
I will also try and manually enter the timings

I got an i7 940 and someone said to me that an i7 will only recognise upto 1066Mhz RAM. To go past that you got to OC it. This true?

Oh and my RAM isnt XMP sadly :/

Do I need to increase the multiplier? Or is there another way?
Sorry im a bit of a newbie at this
« Last Edit: June 20, 2010, 06:47:16 pm by Chris M »

Re: RAM not running at correct speed
« Reply #4 on: June 20, 2010, 07:01:29 pm »
I had no luck when entering the timings manually, upping the voltage and multiplier. It simply doesnt load into windows.
What I did notice though was the default timings werent what the stock speeds should be. Default should be 8-8-8-24-1t but I think they were 7-7-7-16-1T
I've tried increasing the voltage to 1.64v as there isnt a 1.65v option.

Whats next?

CPU-Z notices the timings change, but doesnt seem to notice my voltage change. It still says it runs at 1.5v...
« Last Edit: June 20, 2010, 07:02:12 pm by Chris M »

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: RAM not running at correct speed
« Reply #5 on: June 20, 2010, 09:04:30 pm »
Are you running the latest BIOS version? If not update it.
Have you tried Memtest86?
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: RAM not running at correct speed
« Reply #6 on: June 20, 2010, 09:42:55 pm »
Got the latest BIOS
Not tried Memtest as I dont have it installed

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: RAM not running at correct speed
« Reply #7 on: June 20, 2010, 10:21:21 pm »
You can download the free program Memtest86 here:

http://www.memtest86.com/

You need to burn it to a disk and then you can boot from it. Test your memory one stick at a time if you want to be thorough.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: RAM not running at correct speed
« Reply #8 on: June 20, 2010, 10:31:15 pm »
Thanks, I'll give it a try tomorrow :)

venganza

  • 159
  • 25
    • Pics of my junk
Re: RAM not running at correct speed
« Reply #9 on: June 20, 2010, 10:54:58 pm »
Thanks, I'll give it a try tomorrow :)

Don't fuss over timings, or even volts too much (most RAM will run fine at 1.5v on UD boards even if listed as 1.65v by vendors), and latencies are not a major issue at this stage.

Take a good look over speed settings for the RAM, my guess is you have not increased things a notch, since timings/volts alone wont help matters.

I can't find BIOS screenshots right now, or  could indicate relevant pages.
Intel i7 930 - Venomous-X - Gigabyte GA-X58A-UD9 - EVGA GTX480 - 12gb (6x2gb) OCZ Platinum - Enermax Revolution85+ 1250w - TT Xaser 4000 VI - G-Skill Falcon II 64gb + 7 HDD's - Razer Lachesis+ExactMat - Saitek Eclipse II - LG L246WHX 24" BenQ 24".