Questions about GIGABYTE products > Motherboards with Intel processors

GA-Z270-HD3 & GA-Z170-HD3: boot from M.2 NVMe with RAID enabled

<< < (2/2)

allenkt:
Thanks shadowsports.

I finally had a moment when my coworker wasn't using their computer to try this out. I'm actually very lost on how to do any of these steps...


* How do I enable CSM mode on this motherboard? EDIT: I found this. It turns out I needed to change "Windows 8/10 Features" to "Windows 8/10" instead of "Other OS" before I could see the CSM mode option.
* How/where do I disable Secure Boot? EDIT: I found this as well -- but it seems like the option to disable Secure Boot is only available when CSM is disabled...
* How do I install the "Intel SATA Preinstall driver"? I believe these were the ones you meant. I had previously installed the Intel Rapid Storage manager before originally posting this thread, so a lack of this isn't the cause of the issue.
Thanks for your help with this!

Allen

allenkt:
One last update: To my surprise, I found out that the Windows 10 Disk Management has an option to create a mirrored volume! I really don't have any need to use the Intel RAID controller specifically, so I've just gone ahead with the Windows mirrored volume option. This worked no problem.

Navigation

[0] Message Index

[*] Previous page