Questions about GIGABYTE products > Motherboards with Intel processors

GA-X79-UD3 with Intel i7-3930K not keeping time on Win 7 x64

<< < (2/2)

slalom:
It's on a workgroup, a home computer
There are no VPN Connections

Router's time is correct

Is there a setting in BIOS that could be affecting this?

slalom:
Ok, I found the fix a few days ago

I went into BIOS and noticed the clock was frozen, it should be counting. So I googled "BIOS clock frozen"
One of the results was this page

https://rog.asus.com/forum/showthread.php?35490-Sabertooth-Z87-Bios-Clock-Issue

So I did what one guy said


--- Code: ---Re-flash the latest UEFI, and clear CMOS with the board in standby (this will reset the management engine). See if that helps
--- End code ---

and it's been working ok for a few days now

shadowsports:
Greetings,
I want to be sure I understand,

You said you had re-flashed the BIOS in your initial post.  This did not help. 

So essentially, you performed a CLR_CMOS when the system was in standby and after waking the system, the RTC was keeping correct time.

Is that correct?

slalom:
I re-flashed it a couple of months ago, but as the post said, it needed a CLR_CMOS too. I didn't do that.

The right thing is, re-flash the BIOS and then CLR_CMOS with PSU on (Power supply on but the system off)

And then the BIOS clock was working again

Navigation

[0] Message Index

[*] Previous page