Questions about GIGABYTE products > Motherboards with Intel processors

ME_RCVR (ME Recovery Jumpers)

<< < (2/2)

Roland.Pezzei:
same for me  :(, yesterday i opened a ticket 989994.. i'm still waiting for an answer.. if they answer it i let you know

shadowsports:

--- Quote from: Roland.Pezzei on December 02, 2020, 10:39:39 am ---same for me  :(, yesterday i opened a ticket 989994.. i'm still waiting for an answer.. if they answer it i let you know

--- End quote ---

Appreciate the reply.

Thanks

Roland.Pezzei:
here the answer from the support

it seams there is no recovery function at all

-----------------
Dear Roland,

To flash BMC, you should do it under WebUI.

From your description, it is possible flashed the wrong firmware and caused firmware crush. If the previous firmware you updated was 4xx / 8xx, then you will need to flash the firmware with the same series. If the system is still able to boot up, please flash firmware again with rootpath utility\fwud\dos which is in firmware file. Please use a bootable DOS pen drive and flash firmware under DOS mode.

However, if the problem still remains, then please contact your supplier (where you bought this product) for arrange the repair service.

Regards,
GIGABYTE

toomanylogins:
I got the same reply. Ive tried flashing the bios via DOS a few of times inc different versions etc. Same issue. Did you send board back ? I am still using mine it just takes 6 min to boot.

Navigation

[0] Message Index

[*] Previous page