Questions about GIGABYTE products > Motherboards with Intel processors

H110M-S2H doesn't recognize SSD

(1/3) > >>

amron:
My motherboard- H110M-S2H is brand new and I want it to work with a Sandisk 120Gb (brand new, as well) SSD. the problem is that the mobo doesn't recognize the SSD. I've tried to connect it to the all 4 sata port, but to no avail. just to check and make sure that the SSD is ok, I've connected it to an older pc that I have and it's recognized. I guess that some settings needs to be changed and I'll appreciate your help on what needs to be done. Here it what appears under the "Peripherals" tab
Sata controller(s)      Enabled

Sata mode selection         AHCI

Aggressive LPM support       Enabled     

Sata 0         not installed
Software preserve        Unknown
Port 0              Enabled
Hot plug          disabled
Configured as Esata      Hot plug supported.
If I understand it right - the first three lines are common for all the four sata ports and then there are four ports "0" to "3" with the settings for each port.
Thanks for your help. 

dmdilks:
Have you tried any other drive like a DVD or reg Hard drive? If it isn't showing then there is something wrong with the board.

Under the BIOS Features in these two areas does any thing show up?

Boot Option Priorities & Hard Drive/CD/DVD ROM Drive/Floppy Drive/Network Device BBS Prioritie

amron:
Thanx for your reply. yes, I have connected a sata 3 hdd and it was recognized.

shadowsports:

--- Quote from: amron on June 15, 2020, 02:29:45 pm ---Thanx for your reply. yes, I have connected a sata 3 hdd and it was recognized.

--- End quote ---

Greetings,
Please provide your full systems specs, including all connected devices and peripherals.

What BIOS rev are you running and did you update the BIOS by any chance?

Thanks

amron:
Hi
The motherboard is of course - GA H110M-S2H, cpu - G4400, 8Gb ram and 450W power supply, keyboard & mouse. I'm only at the beginning of putting it together and I want to use the SDD, not a HDD, so nothing more is connected. bios version - F20. it's the version that came on the mb. never touched it.

Navigation

[0] Message Index

[#] Next page