Questions about GIGABYTE products > Motherboards with Intel processors

Problems with upgrade

(1/4) > >>

cookiebun:
Hi I have upgraded my system with these items,

https://www.scan.co.uk/products/gigabyte-aorus-master-intel-z490-s-1200-ddr4-sata3-3x-m2-sli-crossfire-25gbe-ax-wifi-bt51-usb-32-gen

https://www.scan.co.uk/products/intel-core-i9-10900k-s-1200-comet-lake-10-cores-20-threads-37ghz-53ghz-turbo-20mb-cache

https://www.scan.co.uk/products/noctua-nh-d15-dual-radiator-quiet-cpu-cooler-with-two-nh-a15-fans

When I start the system it goes for about 1 minute and then reboots and keeps doing the same thing, I have removed and put everything back in , I have tried it with just two sticks of ram, I will be trying another power supply over the weekend but is there anything else I can try or do you have any idea what could be wrong.   regards Alan.

dmdilks:
What code do you get before it reboots? Plus does it even get to the Bios. If it does what is the temp of the CPU?

cookiebun:
Hi, No it doesn't get to the bios and  I formatted the 500gb me ssd, I am using the system on a 49" Sony bravio 4k tv and nothing shows on the screen and all was working before I upgraded. All cables from power supply were in the right place from previous motherboard so I was just able to plug and go, boot\debug leds jump all over the place ie. 00 2c SC 61 1e

shadowsports:
Greetings Alan,
In addition to dmdilks suggestions, I would also recommend using a standard display connected without adapters (if applicable) during troubleshooting.

There are debug LED's located in the lower right-hand corner of the board.  These may offer other info:

cookiebun:
Hi is there a problem with the wires at the bottom right hand corner of the centre rectangle of the socket.

Navigation

[0] Message Index

[#] Next page